2009 | |
Allwood, J. M.; Tekkaya, A. E.: Knowledge in materials processing technology. Journal of Materials Processing Technology, Vol. 209 (2009) 1, S. 1-2. |
|
Becker, D.; Selvaggio, A.; Marré, M.; Tekkaya, A. E.: Industrielle Anwendungen für das neue Fertigungsverfahren Runden beim Strangpressen. Lightweightdesign, Ausg. 4/5 2009, S. 78-86. |
|
Becker, D.; Tekkaya, A. E.: Mehrachsiges Runden beim Strangpressen. Fortschr. Ber. VDI Reihe 2 Nr. 668, VDI-Verlag Düsseldorf, 2009, S.3-24, ISBN 978-3-18-366802-1 |
|
Ben Khalifa, N.; Becker, D.; Pietzka, D.; Tekkaya, A. E.: Strangpressen - Innovative Verfahren für Leichtbau und Ressourcenschonung. International Aluminium Journal Vol. 85, January/February 2009, S. 95-107. |
|
Ben Khalifa, N.; Meidert, M.; Tekkaya, A. E.: Eigenschaften von kaltumgeformten Bauteilen. Schmiede Journal, März 2009, S. 23-25. |
|
Ben Khalifa, N.; Tekkaya, A. E.: Extrusion Benchmark 2009 – A Step Ahead in Virtual Process Optimization. Light Metal Age Vol. 67 (2009) 2, S. 54-55. |
|
Ben Khalifa, N.; Psyk, V.; Trompeter, M.; Dirksen, U.; Tekkaya, A. E.: Umformung von Aluminiumwerkstoffen – Innovative Verfahren für den Leichtbau. Aluminium Praxis 13. Jhg. Ausgabe 10/09. |
|
Boud, F.; Bayard, O.; Chatti, S.; Axinte, D.; Nicolescu, M.; Aggirre, J.: A new approach in standardising a European curriculum in production engineering. European Journal of Engineering Education, Volume 34, Issue 6, December, 2009, S. 486-496. |
|
Foydl, A.; Ben Khalifa, A.; Brosius, A.; Tekkaya, A. E.: An Assessment of the Grain Structure Evolution during Hot Forward Extrusion of Aluminium Alloy 7020. Edited by Tekkaya, A. E.; Ben Khalifa, N., Advances on Hot Extrusion and Simulation of Light Alloys, Key Engineering Materials Vol. 424 (2009), S. 35-42. |
|
Franzen, V.; Sebastiani, G.; Kwiatkowski, L.; Brosius, A.; Tekkaya, A. E.; Shankar, R.: Rapid Prototyping in der Blechumformung. VDI-Z Nr. 4, April 2009, S. 67-69. |
|
Franzen, V.; Kwiatkowski, L.; Martins, P. A. F.; Tekkaya, A. E.: Single point incremental forming of PVC. Journal of Materials Processing Technology, Vol. 209 (2009) 1, S. 462-469. |
|
Güner, A.; Brosius, A.; Tekkaya, A. E.: Analysis of the Hydraulic Bulge Test with FEA Concerning the Accuracy of the Determined Flow Curves. Key Engineering Materials, Vol. 410-411 (2009) 2, S. 339-447. |
|
Güzel, A.; Jäger, A.; Ben Khalifa, N.; Tekkaya, A. E.: Simulation of the Quench Sensitivity of the Aluminium Alloy 6082. Edited by Tekkaya, A. E.; Ben Khalifa, N., Advances on Hot Extrusion and Simulation of Light Alloys, Key Engineering Materials Vol. 424 (2009), S. 51-56. |
|
Hammers, T.; Marré, M.; Rautenberg, P.; Barreiro, V.; Schulze, D.; Biermann, D.; Brosius, A.; Tekkaya, A. E.: Infl uence of Mandrel‘s Surface and Material on the Mechanical Properties of Joints Produced by Electromagnetic Compression. Steel Research International, Vol. 80 (2009) 5, S. 366-375. |
|
Hammers, T.; Pietzka, D.; Kloppenborg, T.; Weidenmann, K.; Kerscher, E.; Schikorra, M.; Tekkaya, A. E.; Löhe, D.: Verbesserung der Werkstoff- und Bauteileigenschaften von Luftfahrtstringern durch Verbundstrangpressen. Fortschr. Ber. VDI Reihe 2 Nr. 668, VDI-Verlag, Düsseldorf, 2009, S. 351-369, ISBN 978-3-18-366802-1. |
|
Homberg, W.; Tekkaya, A. E.; Beerwald, C.; Brosius, A.; Dau, J.; Trompeter, M.: Multifunctional Lightweight Structures from Tailored Cladded Aluminum Blanks. Key Engineering Materials, Vol. 410-411 (2009) 2, S. 37-42. |
|
Hussain, M. M.; Rauscher, B.; Trompeter, M.; Tekkaya, A. E.: Potential of Melted Polymer as Pressure Medium in Sheet Metal Forming. Key Engineering Materials, Vol. 410-411 (2009) 2, S. 493-501. |
|
Jäger, A.; Ben Khalifa, N.; Tekkaya, A. E.: Wärmebehandlungsstrategie zur Herstellung eigenschaftsgradierter Aluminiumprofi le der Legierung EN AW-6082. International Aluminium Journal, Vol. 85 (2009) 5, S. 68-72. |
|
Jäger, A.; Heilmann, M.; Misiolek, W. Z.; Schikorra, M.; Tekkaya A. E.: Infl uence of cooling rate on distortion and microstructure in extrusion of Al-Mg-Si alloys, International Journal of Material Forming, Vol. 2 (2009) Supplement 1, pp. 81-84, DOI 10.1007/s12289-009-0451-7. |
|
Karbasian, H.; Klimmek, C.; Brosius, A.; Tekkaya, A. E.: Numerical Process Design of Hot Stamping Processes Based on Optimized Thermo-mechanical Characteristics Design. Journal of Steel and Related Materials, STEEL GRIPS 7 (2009) 1, S. 57-60. |
|
Kleiner, M.; Tekkaya, A. E.; Becker, D.; Pietzka, D.; Schikorra, M.: Combination of curved profi le extrusion and composite extrusion for increased lightweight properties. Journal of Production Engineering Research and Development Vol. 3 (2009) 1, S. 63-68, ISSN 0944-6524 (print) and 1863-7353 (online). |
|
Kleiner, M.; Tekkaya, A. E.; Demir, O. K.; Risch, D.; Psyk, V.: A drop-weight high-speed tensile testing instrument. Journal of Production Engineering Research and Development Vol. 3, (2009) 2, S. 175-180. Online available: DOI 10.1007/s11740-009-0154-4. |
|
Kleiner, M.; Tekkaya, A. E.; Chatti, S.; Hermes, M.; Weinrich, A.; Ben-Khalifa, N.; Dirksen, U.: New incremental methods for springback compensation by stress superposition. Journal of Production Engineering Research and Development, Vol. 3 (2009) 2, S. 137-144. |
|
Kloppenborg, T.; Brosius, A.; Tekkaya, A. E.: Simulation des Verbundstrangpressens. Fortschr. Ber. VDI Reihe 2 Nr. 668, VDI-Verlag, Düsseldorf, 2009, S. 3-25, ISBN 978-3-18-366802-1. |
|
Kloppenborg, T.; Ben Khalifa, N.; Tekkaya, A. E.: Accurate Welding Line Prediction in Extrusion Processes. Edited by Tekkaya, A. E.; Ben Khalifa, N., Advances on Hot Extrusion and Simulation of Light Alloys, Key Engineering Materials Vol. 424 (2009), S. 87-96. |
|
Marré, M.; Ruhstorfer, M.; Tekkaya, A.E.; Zaeh, M. F.: Manufacturing of Lightweight Frame Structures by Innovative Joining by Forming Processes, International Journal of Material Forming , Vol. 2 (2009), Supplement 1, pp. 307-310. |
|
Martins, P. A. F.; Kwiatkowski, L.; Franzen, V.; Tekkaya, A. E.; Kleiner, M.: Single Point Incremental Forming of Polymers. Annals of CIRP – Manufacturing Technology, Vol. 58 (2009) 1, S. 229-232. |
|
Munzinger, C.; Lanza, G.; Elser, J.; Ruch, D.; Schneider, M.; Köhler, G.; Gerbracht, T.; Ochs, A.; Marre, M.; Becker, D.; Selvaggio, A.; Huber, S.; Ruhstorfer, M.: Prozesskette zur fl exiblen Herstellung leichter Tragwerkstrukturen. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, Jahrgang 104, Heft/Band 6/2009, Verlag Carl Hanser Verlag, München, S. 442-449. |
|
Okman, O.; Dursunkaya, Z.; Tekkaya, A. E.: Generalized transient temperature behavior in induction heated workpieces. Journal of Materials Processing Technology, Vol. 209 (2009) 18/19, S. 5932-5939. |
|
Pietzka, D.; Tekkaya, A. E.: Verbundstrangpressen. Fortschr. Ber. VDI Reihe 2 Nr. 668, VDI-Verlag, Düsseldorf, 2009, S. 25-44, ISBN 978-3-18-366802-1. |
|
Pietzka, D.; Ben Khalifa, N.; Donati, L.; Tomesani, L.; Tekkaya, A. E.: Extrusion Benchmark 2009 Experimental Analysis of Defl ection in Extrusion Dies. Edited by Tekkaya, A. E.; Ben Khalifa, N., Advances on Hot Extrusion and Simulation of Light Alloys, Key Engineering Materials Vol. 424 (2009), S. 19-26. |
|
Psyk, V.; Marré, M.; Brosius, A.; Tekkaya, A. E.: Umformtechnisches Fügen. Fortschr. Ber. VDI Reihe 2 Nr. 668, VDI-Verlag, Düsseldorf, 2009, S. 133-149. |
|
Risch, D.; Psyk, V.; Tekkaya, A. E.: Investigation on a Deep Drawing and In-Process Electromagnetic Calibration. Steel Research International, Vol. 80 (2009) 5, S. 329-334. |
|
Ritter, R.; Curbach, M.; Trompeter, M.; Tekkaya, A. E.: Material Behavior of an Ultra-High-Performance Concrete Forming Die for Sheet Metal Hydroforming. ACI Materials Journal 106 (2009) 6, S. 515-522. |
|
Selvaggio, A.; Dirksen, U.; Tekkaya, A.E.; Schikorra, M.; Kleiner, M.: Increasing the Production Accuracy of Profi le Bending with Methods of Computational Intelligence. Evolutionary Computation, Vol. 17 (2009) 4, Sp. Iss., pp. 561-576 |
|
Soyarslan, C.; Tekkaya, A. E.: Prevention of Internal Cracks in Forward Extrusion by Means of Counter Pressure: A Numerical Treatise. Steel Research International, Vol. 80 (2009) 9, S. 671-679. Tekkaya, A. E.: High Speed Forming of Metals. Steel Research International, Vol. 80 (2009) 5, S. 315. |
|
Tekkaya, A. E.; Schikorra, M.; Becker, D.; Biermann, D.; Hammer, N.; Pantke, K.: Hot profi le extrusion of AA-6060 aluminum chips. Journal of Materials Processing Technology, Vol. 209 (2009) 7, S. 3343-3350. |
|
Tekkaya, A. E.; Martins, P. A. F.: Accuracy, reliability and validity of fi nite element analysis in metal forming: a user’s perspective. Engineering Computations, Vol. 26 (2009) 8, S. 1026 -1055. |
|
Trompeter, M.; Franzen, V.; Witulski, J.; Tekkaya, A. E.: Thermisch beschichtete Werkzeuge für die Blechumformung. Der Schnitt- und Stahlwerkzeugbau, Band 5, S. 6-12. |
|
Trompeter, M.; Rauscher, B.; Karbasian, H.; Tekkaya, A. E.; Homberg, W.: Hydroforming of Large-area Multi-cell Sheet Metal Structures. Key Engineering Materials Vol. 410-411 (2009) 2, S. 53-60, ISSN 1013-9826. |
|
Trompeter, M.; Franzen, V.; Witulski, J., Tekkaya, A. E.: Thermisch beschichtete Werkzeuge für die Blechumformung, Der Stahlformenbauer, Fachverlag Möller, 2009, Band 6, 62-68. |
|
Weinrich, A.; Ben Khalifa, N.; Chatti, S.; Dirksen, U.; Tekkaya, A. E.: Springback Compensation by Superposition of Stress in Air Bending. Key Engineering Materials, Vol. 410-411 (2009) 2, S. 621-628, ISSN 1013-9826. |
|
Zaeh, M. F.; Tekkaya, A. E.; Langhorst, M.; Ruhstorfer, M.; Schober, A.; Pietzka, D.: Experimental and numerical investigation of the process chain from composite extrusion to friction stir welding regarding the residual stresses in composite extruded profi les. Journal of Production Engineering Research and Development / Published Online. |
2008 | |
Becker, D.; Schikorra, M.; Tekkaya, A. E.: Manufacture of 3D Curved Profiles for Structure Components. Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures - Phase II: Integration, Vol. 43 (2008), S.1-8, ISBN 0-87849-385-9. |
|
Franzen, V.; Kwiatkowski, L.; Sebastiani, G.; Shankar, R.; Tekkaya, A. E.: Dyna-Die: Towards Full Kinematic Incremental Forming. International Journal Material Forming (2008), DOI: 10.1007/s12289-008-0187-9. |
|
Franzen, V.; Kwiatkowski, L.; Martins, P. A. F.; Tekkaya, A. E.: Single point incremental forming of PVC. Journal of Materials Processing Technology (2008), Vol. 209, S. 462-469. |
|
Hussain, M.; Rauscher, B.; Tekkaya, A. E.: Wirkmedienbasierte Herstellung hybrider Metall-Kunststoff-Verbundbauteile mit Kunststoffschmelzen als Druckmedium. Materialwissenschaft und Werkstofftechnik, 39 (2008) 9. |
|
Jeswiet, J.; Geiger, M.; Engel, U.; Kleiner, M.; Schikorra, M.; Duflou, J.; Neugebauer, R.; Bariani, P.; Bruschi, S.: Metal forming progress since 2000. CIRP Annals, Journal of Manufacturing Science and Technology, 1, (2008), S. 2-17. |
|
Khalifa, N. B.; Becker, D.; Schikorra, M.; Tekkaya, A. E.: Recent Developments in the Manufacture of Complex Components by Influencing the Material Flow During Extrusion. Key Engineering Materials Vol. 367 (2008), S. 55-62. |
|
Kleiner, M.; Curbach, M.; Tekkaya, A. E.; Ritter, R.; Speck, K.; Trompeter, M.: Development of ultra high performance concrete dies for sheet metal hydroforming. Production Engineering - Research and Development Vol. 2, No. 2, June 2008. Annals of the WGP - Wissenschaftliche Gesellschaft für Produktionstechnik, S. 201-208, ISSN 0944-6524. |
|
Kloppenborg, T.; Schikorra, M.; Schomäcker, M.; Tekkaya, A. E.: Numerical Optimization of Bearing Length. Composite Extrusion Processes. Key Engineering Materials Vol. 367 (2008), S. 47-54. |
|
Kloppenborg, T.; Schikorra, M.; Rottberg, J. P.; Tekkaya, A. E.: Optimization of the Die Topology in Extrusion Processes. Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures - Phase II: Integration, Vol. 43 (2008), S. 81-88, ISBN 0-87849-385-9. |
|
Kloppenborg, T.; Hammers, T.; Schikorra, M.; Kerscher, E.; Tekkaya, A. E.; Löhe, D.: Prototype Manufacturing of Extruded Aluminium Aircraft Stringer Profiles with Continuous Reinforcement. Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures - Phase II: Integration, Vol. 43 (2008), S. 167-174, ISBN 0-87849-385-9. |
|
Marré, M.; Brosius, A.; Tekkaya, A. E.: Joining by Compression and Expansion of (None-) Reinforced Profiles. Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures - Phase II: Integration, Vol. 43 (2008), S. 57-68, ISBN 0-87849-385-9 and 13 978-0-87849-385-2. |
|
Marré, M.; Brosius, A.; Tekkaya, A. E.: New Aspects of Joining by Compression and Expansion of Tubular Workpieces (Keynote Paper). International Journal of Material Forming, Springer Paris, ISSN 1960-6206 (Print) and 1960-6214 (Online), DOI 10.1007/s12289-008-0140-y. |
|
Marré, M.; Franzen, V.; Rauscher, B.; Tekkaya, A. E.: Umformtechnische Herstellung und Verarbeitung von Metall- Kunststoff-Hybridbauteilen. Der Schnitt- und Stanzwerkzeugbau, Heft 3 (2008), S. 34-36. |
|
Marré, M.; Psyk, V.; Tekkaya, A. E.: Hochgeschwindigkeitsfügen von Aluminiumprofilen mithilfe der elektromagnetischen Umformung. International Aluminium Journal (2008). ISSN 0002-6689. |
|
Önder, E.; Tekkaya, A. E.: Numerical simulation of various cross sectional workpieces using conventional deep |
|
Pietzka, D.; Schikorra, M.; Tekkaya, A. E.: Embedding of Alumina Reinforcing Elements in the Composite Extrusion Process. Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures - Phase II: Integration, Vol. 43 (2008), S. 9-16, ISBN 0-87849-385-9. |
|
Rauscher, B.; Trompeter, M.; Tekkaya, A. E.: Manufacturing and forming of partially cladded double blanks. Journal of Advanced Manufacturing Systems (2008), 7 (1), S. 33-36. |
|
Risch, D.; Brosius, A.; Tekkaya, A.E.: Analyse lokaler Steifigkeiten im Werkstück zur Vermeidung unerwünschter Deformationen bei der elektromagnetischen Blechumformung. wt Werkstattstechnik online Jahrgang 98 (2008) Heft1/2, S. 109-114. |
|
Schikorra, M.; Tekkaya, A. E.; Kleiner, M.: Experimental investigation of embedding high strength reinforcements in extrusion profiles. CIRP Annals - Manufacturing Technology, Vol. 57, Issue 1, (2008), S. 313-316. |
|
Schikorra, M.; Donati, L.; Tekkaya, A. E.; Tomesani, L.: Microstructure analysis of aluminum extrusion: Prediction of microstructure on AA6060 alloy. Journal of Materials Processing Technology, Vol. 201, Issues 1-3, (2008), S. 156-162. |
|
Soyarslan, C.; Tekkaya, A. E.; Akyuz, U.: Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions. Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM) 88, No. 6 (2008), S. 436-453. |
|
Tekkaya, A. E.; Hermes, M.; Chatti, S.; Weinrich, A.: Three-Dimensional Bending of Profiles with Stress Superposition. International Journal of Material Forming (2008), ISBN 1960-6206 (Print) and 1960-6214 (Online). |
|
Tekkaya, A. E.; Kleiner, M.; Franzen, V.; Kwiatkowski, L.; Sebastiani, G.; Shankar, R.: Dyna-Die: Towards Full Kinematic Incremental Forming. International Journal of Material Forming (2008), ISBN 1960-6206 (Print) and 1960-6214 (Online). |
|
Tekkaya, A. E.; Michael, M.; Brosius, A.: New Aspects of Joining by Compression and Expansion of Tubular Workpieces. International Journal of Material Forming (2008). ISBN 1960-6206 (Print) and 1960-6214 (Online). |
|
Tekkaya, A. E.; Trompeter, M.; Homberg, W.: Innovative forming technology as a key for the effective manufacturing of lightweight structures. Journal of Advanced Manufacturing Systems (2008), 7 (1), S. 37-40. |
|
Tekkaya, A. E.; Allwood, J. M.: Editorial. Journal of Materials Processing Technology (2008), 195 (1 – 3), S. 1-2. | |
Tekkaya, A. E.; Trompeter, M.; Witulski, J.: Innovative sheet metal-forming processes. International Journal of Mechatronics and Manufacturing Systems, Vol. 1, Nos. 2/3, 2008, S. 157-170. |
|
Weinert, K.; Fleischer, J.; Tekkaya, A. E.; Zäh, M.; Schikorra, M.: Flexible manufacturing of Lightweight Frame Structures - Phase II: Integration. Advanced Materials Research, Vol. 43 (2008), ISBN 0-87849-385-9. |
Alle Dissertation des IUL seit 1992 sind in der Reihe: Dortmunder Umformtechnik, Verlag Shaker Aachen erschienen.
Since 1992 every dissertation is released by: Verlag Shaker Aachen Dortmunder Umformtechnik.
2020 | ||
110 |
Heinrich Traphöner Erweiterung der Anwendungsgrenzen des ebenen Torsionsversuchs Online verfügbar: Link
Aufgrund seiner vorteilhaften Eigenschaften wird der ebene Torsionsversuch zunehmend zur Charakterisierung von Blechwerkstoffen eingesetzt. Dies sind der ideale einfache Scherspannungszustand bis zum Bruch, die Materialcharakterisierung ohne Randzonen und Kerbwirkungen, die direkte Messbarkeit von Spannungen und Dehnungen und die daraus resultierende Bestimmung von Fließkurven bis zu sehr hohen Vergleichsformänderungen. |
|
109 |
Oliver Hering Schädigung in der Kaltmassivumformung: Entwicklung, Auswirkungen und Kontrolle Online verfügbar: Link
Im Bereich der Umformtechnik wird die Leistungsfähigkeit unter anderem durch die Mikrostruktur, die Kaltverfestigung, die Textur, den Faserverlauf sowie die Eigenspannungen verändert. Schädigung, als Eigenschaft von produzierten Bauteilen, wird bei der Auslegung nicht berücksichtigt, da weder genau bekannt ist, welche Lastpfade zu Schädigung führen, noch wie Schädigung die Leistungsfähigkeit beeinflusst. In dieser Arbeit werden die beim Voll-Vorwärts-Fließpressen auftretenden Lastpfade numerisch ermittelt und mittels Triaxialität und Lode-Winkel-Parameter beschrieben. Das Voll-Vorwärts-Fließpressen wurde als ein ideales Verfahren zur Ermittlung von Wirkzusammenhängen zwischen Lastpfad, Schädigung und Leistungsfähigkeit identifiziert, da entlang der Mittelachse der fließgepressten Bauteile eine starke Abhängigkeit des hydrostatischen Drucks in der Umformzone von den Prozessparametern sowie bekannte homogene Umformgrade und vernachlässigbare Eigenspannungen nach Bauteilauswurf und Probenentnahme vorliegen. |
|
108 |
Rickmer Meya Schädigungskontrolliertes Blechbiegen mittels Druckspannungsüberlagerung Online verfügbar: Link
Bei der derzeitigen Produktauslegung gebogener Bauteile werden häufig nur die Eigenschaften des Ausgangsmaterials einbezogen. Teilweise werden zudem die umformtechnisch induzierten Verfestigungen und Eigenspannungen berücksichtigt. Die durch den Umformvorgang eingebrachte Schädigung wird nicht betrachtet. Der Prozess der duktilen Schädigung wird in dieser Arbeit als Porennukleation, -wachstum und -zusammenschluss definiert. Da der negative Einfluss der Schädigung auf die Leistungsfähigkeit unbekannt ist, werden Bauteile häufig überdimensioniert. Diese Unkenntnis wird über erhöhte Sicherheitsfaktoren kompensiert. Daher wird in dieser Arbeit erstmals dargestellt, inwiefern die Schädigung beim Biegen eingestellt werden kann und welchen Einfluss die Schädigung auf die Leistungsfähigkeit hat. |
|
2019 | ||
107 |
Martin Schwane Entwicklung und Eigenschaften von Längspressnähten beim Aluminiumstrangpressen
Das Aluminiumstrangpressen ist ein etabliertes Fertigungsverfahren zur Herstellung von Halbzeugen, welche in verschiedensten industriellen Bereichen eingesetzt werden. Bei der üblichen Verfahrensvariante des Pressens über Kammerwerkzeuge sind die durch einen Pressschweißvorgang entstehenden Längspressnähte unvermeidlich. Um die mechanische Integrität von Pressprofilen durch eine geeignete Prozess- und Werkzeuggestaltung sicherstellen zu können, ist das Verständnis der Zusammenhänge, welche die Längspressnahteigenschaften beeinflussen, erforderlich. |
|
106 |
Osman Koray Demir New test and interpretation of electromagnetic forming limits of sheet metal
A new method is proposed to determine the electromagnetic forming limits of sheet metal. The method deforms the specimen apex on a constant strain path. The strain path can be varied between uniaxial tension and biaxial tension by changing the specimen and tool shapes. Furthermore, the method breaks the specimen at the apex. In order to ensure an apex failure and avoid bending, a new specimen concept that promotes uniform pressure application is developed. |
|
105 |
Christoph Dahnke Verbundstrangpressen adaptiver Leichtbaukomponenten aus Aluminium und Formgedächtnislegierungen
Im Verbund mit Leichtbauwerkstoffen wie Aluminium oder Magnesium zeigen Formgedächtnislegierungen ein hohes Potenzial. Sogenannte Formgedächtnis-Metall-Matrix-Verbundwerkstoffe zeichnen sich insbesondere durch verbesserte mechanische Eigenschaften und eine erweiterte Funktionalität aus. Das kontinuierliche Verbundstrangpressen bietet eine flexible und wirtschaftliche Möglichkeit zur Herstellung von Verbundprofilen mit eingebetteten Formgedächtnis-Drähten. Durch eine gezielte Positionierung sowie eine umformtechnische Weiterverarbeitung lassen sich so adaptive Leichtbauprofile herstellen. Bei einer thermischen Aktivierung sind die Profile in der Lage eine Auslenkung zu vollziehen oder mit einer Änderung ihrer mechanischen Eigenschaften auf die Temperaturerhöhung zu reagieren. |
|
104 |
Jörn Lueg-Althoff Fügen von Rohren durch elektromagnetische Umformung – Magnetpulsschweißen Online verfügbar: Link
Um einen effizienten und wirtschaftlichen Ressourceneinsatz zu gewährleisten, sollte in der Fertigungstechnik für jede Anwendung der ideale Werkstoff ausgewählt werden. Da die meisten technischen Strukturen aus mehr als einer Komponente bestehen, stellt sich die Herausforderung, ungleiche Materialien durch geeignete Fügetechnologien zu verbinden. Kollisionsschweißverfahren wie das Magnetpulsschweißen (MPW) können eine Alternative zu herkömmlichen Schmelzschweißverfahren sein. Beim MPW entstehen Schweißnähte durch eine Hochgeschwindigkeitskollision ohne übermäßige Erwärmung der Fügepartner. |
|
103 |
Christian Heinrich Löbbe gen. Brüggemann Temperaturunterstütztes Biegen und Wärmebehandeln in mehrstufigen Werkzeugen Der Schlüssel zur Herstellung von hochfesten und komplex geformten Blechbauteilen ist die kombinierte Umformung und Wärmebehandlung. Die Untersuchung dient zur Entwicklung der mehrstufigen Folgeverbund- und Transfer-Werkzeug-Technologien durch eine in-situ thermische Behandlung. Für den kompakten Werkzeugaufbau wird das einstufige induktive Erhitzen und die mehrstufige Wärmeabfuhr entwickelt. Weiterhin werden die Mechanismen beim Biegen erforscht und durch eine Modellierung abgebildet. Beim Freibiegen ist neben dem Rückfedern das Überbiegen ein unabhängiger Effekt, mit dem das Biegeergebnis kontrolliert wird. Beim Gesenkbiegen führt die Wärmekontraktion zur Spannungsüberlagerung, die eine Kalibrierung des Biegeteils ermöglicht. Zur Wärmebehandlung von Stählen werden die Austenitisierung und das Abschrecken analysiert und modelliert. Zur Kontrolle der Zugfestigkeit ist neben der Korngröße die Kohlenstoffbeladung eine zentrale Stellgröße. In Fallstudien wird schließlich die Anwendung zur Fertigung von Bauteilen mit einer definierten Geometrie und Festigkeit veranschaulicht. |
|
102 |
Soeren Gies Thermische Spulenverluste bei der elektromagnetischen Blechumformung
Die Etablierung elektromagnetischer Umformverfahren im industriellen Umfeld erfordert eine hohe und berechenbare Werkzeugstandzeit. Diese wird insbesondere im Dauerbetrieb nicht nur durch mechanische, sondern auch durch thermische Belastungen beeinflusst. Ursächlich für die Spulenerwärmung sind die Stromwärmeverluste in der Werkzeugspule. Mit einem Anteil von bis zu 50% stellt diese Komponente den dominanten Verlustmechanismus in der Energiewandlungskette dar. Aufgrund dieser Bedeutung für die Spulenbelastung und die Prozesseffizienz stehen die Verluste in der Werkzeugspule im Fokus dieser Arbeit. Das Ziel umfasst die physikalische Beschreibung der Spulenverluste und die Entwicklung technologischer Ansätze zur Verlustreduzierung. |
|
2018 | ||
101 |
Isik Kerim Modelling and characterization of damage and fracture in sheet-bulk metal forming
Sheet-bulk metal forming differs from the conventional sheet forming processes, in the application of the bulk forming operations on the sheet material. Although the initial workpiece is a sheet blank, occurrence of the three-dimensional stress/strain states requires a revise of the basic assumptions and available material models for the conventional sheet forming processes. |
|
100 |
Stefan Ossenkemper Verbundfließpressen in konventionellen Fließpresswerkzeugen
Im Rahmen dieser Arbeit wird die Herstellung von Verbundwellen mittels Voll-Vorwärts-Fließpressen von hybriden Halbzeugen in konventionellen Fließpresswerkzeugen untersucht. Die Untersuchungen fokussieren sich dabei vornehmlich auf die Werkstoffkombination Stahl-Aluminium. Die verwendeten Halbzeuge bestehen jeweils aus einem rückwärts-fließgepressten Napf mit einem eingelegten Leichtmetallkern. Aufgrund der umformtechnischen Herstellbarkeit ergibt sich hierbei eine sehr hohe Werkstoffeffizienz. Durch die gemeinsame Umformung der beiden Komponenten entsteht ein Verbund zwischen der äußeren Hülle und dem inneren Kern. Die Verbundeigenschaften werden analytisch, numerisch und experimentell auf die Schlussarten Kraft-, Stoff- und Formschluss untersucht. Ein entwickeltes analytisches Modell erlaubt die Abschätzung des Kraftschlusses in Abhängigkeit der Werkstoffkennwerte sowie der Prozessgrößen. Das entwickelte Modell konnte mittels Push-Out-Tests validiert werden. |
|
99 |
Peter Sieczkarek Inkrementelle Blechmassivumformung
Im Hinblick auf die Herstellung gewichtsangepasster Bauteile mit identischer oder verbesserter Belastbarkeit sowie einer gesteigerten Funktionsintegration wird die Produktions- und Umformtechnik vor grundsätzlich neue Herausforderungen gestellt. Der Trend einer stetig zunehmenden Variantenvielfalt sowie Produktdiversifikation fordert zudem individualisierte Komponenten und damit auch flexible Fertigungsprozesse. Um diesen zunehmenden Anforderungen, insbesondere aus dem Automobilbereich, gerecht zu werden, wurde im Rahmen dieser Arbeit eine neuartige Fertigungstechnologie, die inkrementelle Blechmassivumformung (iBMU) grundlegend untersucht. Die iBMU wird definiert als die inkrementelle Umformung von Blechen mit gezielt kontrolliertem dreidimensionalen Werkstofffluss. Dazu werden Massivumformprozesse inkrementell und lokal begrenzt auf Blechwerkstoffe mit Ausgangsdicken zwischen 2 bis 3 mm angewandt. Ein charakteristisches Merkmal ist die kleine Umformzone im Vergleich zum Werkstückvolumen, wodurch geringere Umformkräfte erforderlich sind. Die Schlüsselinnovation liegt in einer gezielten Steuerung des Werkstoffflusses im Rahmen einer Sequenz von Einzelprozessen. Die experimentelle Prozessanalyse erfolgt dabei mittels einer neuartigen Mehrachspresse, mit der unterschiedliche Umformoperationen in nahezu beliebiger zeitlicher und räumlicher Anordnung durchführbar sind. |
|
98 |
Sammer Alkas Yonan Inkrementelle Kaltumformung von Thermoplasten
Herkömmliche Verfahren zur Herstellung von Produkten aus Thermoplasten basieren auf einer Erwärmung des Halbzeugs bis zur Erweichungstemperatur oder knapp darunter, Formgebung und Erstarrung. Diese Verfahren sind wegen der Werkzeugbindung erst bei großen Stückzahlen wirtschaftlich. Die erforderlichen Drücke, Erwärmungs- und Kühlungsapparate benötigen zudem große Umformmaschinen. Die inkrementelle Umformung bietet eine Möglichkeit zur Herstellung von Thermoplast-Bauteilen bei Raumtemperatur und mit geringer oder ohne Werkzeugbindung. Bei der Verfahrensvariante ohne Gegenwerkzeug wird die Bauteilkontur durch die Bewegung eines stiftförmigen Werkzeugs entlang einer vorgegebenen Bahn sukzessive hergestellt. Die Notwendigkeit der Anschaffung von Sondermaschinen entfällt, da bereits vorhandene CNC-Universalfräsmaschinen für den Einsatz als inkrementelle Umformmaschine umrüstbar sind. |
|
97 |
Goran Grzancic Verfahrensentwicklung und Grundlagenuntersuchungen zum Inkrementellen Profilumformen
In Zeiten hoher Produktdiversifikation, insbesondere angetrieben durch individuelle, kundenspezifische Produktgestaltung, ist ein Anstieg der Variantenvielfalt von Produkten in vielen Industriezweigen zu beobachten. Die an die jeweiligen Fertigungssysteme und -prozesse gestellten Anforderungen ändern sich dahingehend, dass eine wesentlich höhere Fertigungsflexibilität notwendig ist. Diese Forderung wirkt sich ebenfalls auf die Herstellung von Profilen aus. Zusätzlich besteht hierbei allerdings der Bedarf an gewichtsoptimierten Strukturen, die einen wesentlichen Beitrag zum Leichtbau leisten. Großes Potenzial, den beiden Anforderungen gerecht zu werden, weist das neuartige Verfahrensprinzip des Inkrementellen Profilumformens auf. |
|
96 |
Hui Chen Granular medium-based tube press hardening Using granular materials as forming medium enables the press hardening process for tubes and profiles. However, granular material is a conglomeration of macroscopic particles unlike a fluid medium that possesses hydrostatic properties. The aim of this thesis is to investigate the physical concept of this new metal forming process, work out and extend the process limit. First, the performance of granular material as working medium and the principle of choosing appropriate granular material is identified. A calibration procedure for the material model of granular material is introduced based on the characterization strategy of using instrumented die compaction tests and high-pressure direct shear tests. The flow behavior of 22MnB5 material, which is essential for process numerical modelling, is characterized by a self-designed hot tensile test. For a better understanding of the pressure transferring mechanism, an analytical model is developed. A fully-coupled thermal-mechanical FE model of granular medium-based tube press hardening is established. Press hardening experiments for a T-shape 22MnB5 tube using granular material as forming medium are carried out. In order to specify the process limit of using granular materials as forming medium, axisymmetric tube press hardening experiments are designed and conducted as an example to define the process windows by FE simulation and experimental investigations. This thesis establishes the required fundamental knowledge for an innovative granular medium-based tube press hardening process. Also, an alternative process of passive forming is proposed. The potential of producing high strength and high stiffness components offers the applications of lightweight construction in the automotive industry. |
|
2017 | ||
95 |
Dominik May
Globally Competent Engineers
Für Absolventinnen und Absolventen der Ingenieurwissenschaften kommt der Fähigkeit, in internationalen Zusammenhängen zu denken und zu handeln, eine zunehmend bedeutende Rolle zu. Die Vorbereitung darauf ist daher eine Herausforderung heutiger Lehr-Lernentwicklung. |
|
94 |
Siu Ping Afonichev Numerische Simulation der Umformung von Sandwichblechen unter Berücksichtigung großer Krümmungen Der Einsatz von Metall-Kunststoff-Metall-Sandwichblechen in der Karosserie erfordert eine geeignete Simulationsmethodik, damit ein Methodenplaner den Fertigungsprozess korrekt auslegen kann. Aufgrund des Mehrschichtaufbaus mit weicher Kernschicht ist für den Sandwichwerkstoff ein anderes Verhalten gegenüber monolithischem Werkstoff bei der Verarbeitung zu beobachten. Das besondere Verhalten zeigt sich vor allem im Bereich starker Krümmung wie sie zum Beispiel beim Falzen oder bei der Faltenbildung auftreten. Um dieses Verhalten zu berücksichtigen, muss das Modell zur Abbildung der Sandwichstruktur geeignet gewählt werden. Die Mechanik des Sandwichverhaltens durch enge Krümmungen mit kleinen Radien reduziert sich auf das Biege- und Beulverhalten der vorliegenden Sandwichstruktur. Der Schwerpunkt der Arbeit liegt zum einen in der mechanischen Charakterisierung des Sandwichbleches bei Biege- und Beulvorgängen. Die Analyse zeigt, dass sich das Sandwichblech aufgrund der weichen Kunststoffkernschicht biegeweicher bzw. beulsensitiver gegenüber metallischen Vollblechen verhält. Zum anderen beschäftigt sich die Arbeit mit der Umformsimulation von Sandwichblechen. Dabei liegt der Fokus auf die Untersuchung des Verhaltens bei starken Krümmungen wie sie beim Falzen oder auch bei der Faltenbildung auftreten. In solchen Fällen vermag eine schichtweise Modellierung der Sandwichstruktur das Verhalten am besten nachzubilden. Vereinfachte Modellierungen, die die Materialkennwerte und die Schichtverschiebungen über die Gesamtdicke mitteln und damit verschmieren, vermögen die Machbarkeit von Bauteilen global vorherzusagen. |
|
93 |
Georgios Georgiadis Hot stamping of thin-walled steel components
In recent years, hot stamping has been established as a standard process for mass manufacturing of various crash-relevant body-in-white components, as a result of the rising demand for car body's weight reduction and crashworthiness increase. To further exploit the lightweight potential of this forming technology, investigations on the hot stamping of thin-walled boron-manganese steel components were conducted in this thesis. |
|
92 |
Lars Hiegemann Glattwalzen beschichteter Oberflächen Glattwalzen dient dem Nachbearbeiten von Oberflächen, indem diese durch ein Umformen der Rauheitsspitzen eingeebnet werden. In dieser Arbeit wird der Walzprozess genutzt, um die Oberfläche von thermisch gespritzten Hartmetall-Beschichtungen zu glätten. Dieses erfolgt vor dem Hintergrund, das tribologische Verhalten der Oberflächen zu verbessern bzw. an deren Einsatzzweck anzupassen. Hierzu werden zunächst die mikroskopischen Umformvorgänge an einzelnen Rauheitsspitzen und anschließend die makroskopischen Vorgänge zwischen Walzkugel und beschichteter Oberfläche betrachtet. Dieses mündet letztendlich in einem mathematischen Modell, welches es ermöglicht, die Rauheit nach einem Glattwalzprozess vorauszusagen und damit den Walzprozess auszulegen. Somit wird die Voraussetzung geschaffen, zukünftig auf umfangreiche experimentelle Vorversuche des Glattwalzprozesses verzichten zu können. Um auch die Auswirkungen erhöhter Walzgeschwindigkeiten auf das Walzergebnis untersuchen zu können sowie die Bearbeitungszeit zu verkürzen, wird ein neu entwickeltes Walzwerkzeug vorgestellt, welches die Rotation einer Frässpindel mit deren Vorschub überlagert. Im Hinblick auf das Reibverhalten der Beschichtungen führt die walztechnische Nachbearbeitung zu einer starken Verringerung des Reibungskoeffizienten. Ein mögliches Anwendungsfeld einer solchen glattgewalzten, thermisch gespritzten Beschichtung stellen die Oberflächen von Tiefziehwerkzeugen dar. Vor diesem Hintergrund wird gezeigt, dass das Glattwalzen sowohl das Prozessfenster für den Tiefziehprozess vergrößert und die Prozesskräfte verringert als auch die Oberflächenqualität der produzierten Bauteile verbessert. |
|
2016 | ||
91 |
Lin Chen An Investigation of Failure Mechanisms in Forming of Monolithic and Composite Sheets
The forming behavior of the novel lightweight construction, e.g. advanced high strength steel and composite sheets, gains more and more attention. This thesis aims to investigate the failure mechanisms of DP1000, CP1000, aluminum alloy and an aluminum/low density polyethylene half sandwich sheet in blanking and bending. |
![]() |
90 |
Hamad ul Hassan Springback in deep drawing – Accurate prediction and reduction
One of the main problems in the field of deep drawing is springback. After the deep drawing process, the parts are unloaded which results in the deviation of the formed part from the desired geometry due to elastic strains. This springback must be predicted accurately and reduced efficiently to avoid problems later in the assembly stage. If not coped properly, it can lead to unwanted increase in cost and time delays due to tool reworking. Prediction of the springback is normally carried out by finite element (FE) analysis using a single stress-strain curve that is expected to reproduce the material behavior over a wide range of strains. However, the application of single stress-strain curve for the springback prediction has shown limited potential for complex parts. In addition, the springback reduction based on increase of the constant blankholder force is limited. |
![]() |
89 |
Christian Pleul
Das Labor als Lehr-Lern-Umgebung in der Umformtechnik
Die synergetische Wechselbeziehung fachlicher/fach- methodischer Verortung sowie lernförderlicher Gestaltung der Lehr-Lern-Umgebung Labor adressiert explizit die Nutzung des formatinhärenten Potenzials und fördert damit explizit das konzeptionelle Verständnis der Umformtechnik an sich. |
|
88 |
Gerd Sebastiani Erweiterung der Prozessgrenzen inkrementeller Blechumformverfahren mittels flexibler Werkzeuge
Wodurch lassen sich die hohen Formänderungen bei der inkrementellen Blechumformung erzielen? |
|
87 |
Sheng Cai Metal forming by vaporizing foils is an innovative impulsive forming method which requires no electrical conductivity of the workpiece and no expensive coils. The aim of this thesis is to develop innovative pressure distributions by vaporizing foils in order to improve the forming accuracy and the manufacturing productivity. |
|
2015 | ||
86 |
Andres Weinrich Mora
Blechbiegeverfahren werden durch eine stark ausgeprägte Rückfederung charakterisiert. Mit der inkrementellen Spannungsüberlagerung beim Freibiegen wird eine Möglichkeit geboten, die Rückfederung bei einer hohen Flexibilität in der Fertigung zu reduzieren. |
|
85 |
Annika Foydl Strangpressen partiell verstärkter Aluminiumprofile
Das vielversprechende neuartige, partielle Verbundstrangpressen, welches in dieser Arbeit untersucht wird, bietet die Möglichkeit Strangpressbauteile mit verbessertem effektiven Gewicht herzustellen. Das Portfolio an Strangpressprozessen wird hierdurch erweitert. Durch den Prozess können Aluminiumstrangpressblöcke mit hoch festen Werkstoffen unter Verwendung von konventionellen Strangpressmatrizen kombiniert werden. Das Verfahren bietet die Möglichkeit Verstärkungselemente diskontinuierlich in den Strang einzubringen. Hierfür werden die Strangpressblöcke mit Bohrlöchern versehen und hoch feste Werkstoffe in Form von z. B. Zylinder eingesetzt. |
|
84 |
Stephan Hänisch
Bei dem verbreiteten Fertigungsverfahren der Kaltmassivumformung können im Zuge einer häufig nachgeschalteten Wärmebehandlung unerwünschte Maß- und Formänderungen der Werkstücke auftreten. Die Ursachen dieses Bauteilverzuges und die Auswirkungen verschiedener Einflussfaktoren sind bis heute nicht eindeutig geklärt. Im Rahmen der hier vorliegenden Arbeit werden die Wirkzusammenhänge zwischen Kaltmassivumformung, Wärmebehandlung und Verzug anhand des Voll-Vorwärts-Fließpressens analysiert. |
|
83 |
Ahmet Güzel
In order to meet the demands of specific mechanical properties and to introduce additional functional elements in the geometry of the extruded profiles, subsequent forming processes are required. Utilization of electromagnetic forming subsequent to hot aluminum extrusion to manufacture functionally graded extrusion profiles is an innovative forming technology. |
|
82 |
Alper Güner
One of the main problems in the field of sheet metal characterization is the inhomogeneous deformation fields caused by edge effects in the specimens. Except the uniaxial tension test, other tests like the plane strain tension test or the Miyauchi test suffer from this fact. For this reason, the desired ideal deformation state can only be achieved in the middle of the gauge area of the specimens. The inhomogeneous strain field in the gauge zone can be captured by optical strain measurement methods nowadays. However for the calculation of the yield stresses globally acting tool forces and a single averaged value for the instantaneous gauge area are used. Hence the inhomogeneity is an error source for the analytical determination of yield stresses. |
|
81 |
Christian Weddeling Online verfügbar: Link
As a way to reduce a vehicle's weight, the application of space frame structures has been increasing. This innovative lightweight design concept is already commonly applied in the low volume production of cars. Due to the high stiffness and low mass, extruded aluminum profiles are particularly suitable for the manufacturing of such structures. But the potential for great weight reduction using space frames is curtailed by the difficulties associated with manufacturing the space frames. These structures have complex demands on joining technologies, and conventional processes often are pushed to their technological limits. |
|
2014 | ||
80 |
Ramona Hölker
Beim Strangpressen von Aluminiumlegierungen können mit zunehmender Pressgeschwindigkeit und der damit verbundenen Erhöhung der Werkstücktemperatur Oberflächenfehler wie Heißrisse und grobes Korngefüge entstehen. Der Arbeitsbereich wird hierdurch eingeschränkt. Die lokale Werkzeuginnenkühlung bietet ein großes Potenzial zur Steigerung der Produktivität beim Aluminium-Strangpressen. Mit steigender Geometriekomplexität des zu fertigenden Strangpressprofils bzw. -werkzeugs ist das Einbringen von der Werkzeugkontur folgenden, oberflächennahen Kühlkanälen mittels konventioneller Fertigungsverfahren nicht möglich. Der Einsatz von Rapid-Tooling-Verfahren stellt einen vielversprechenden Ansatz zur Überwindung dieser Problematik dar. |
![]() |
79 |
Christoph Becker
Im Rahmen dieser Arbeit wird ein Umformverfahren gezeigt, welches gebogene Rohre aus hochfesten Werkstoffen herstellen kann. Das sogenannte inkrementelle Rohrumformen kann neben der Erzeugung des gebogenen Bauteils dieses auch mit einem variierenden Durchmesser über dessen Längsachse versehen. Das inkrementelle Rohrumformen ist eine Kombination aus einem Rohrbiegeprozess und einem Drückprozess. Aufgrund dieser Prozessüberlagerung können verschiedenste Prozesscharakteristiken beobachtet werden. Insbesondere das verminderte Biegemoment und somit die verminderte Rückfederung, verglichen mit konventionellen Biegeprozessen, stehen im Fokus der Arbeit. Zunächst wird basierend auf grundlegenden Verfahrensbetrachtungen ein neuartiges Maschinensystem für das inkrementelle Rohrumformen vorgestellt. Daraufhin wird der Effekt des reduzierten Biegemomentes sowie der reduzierten Rückfederung mithilfe von experimentellen, analytischen sowie numerischen Betrachtungen untersucht. Es wird gezeigt, dass sich diese Effekte durch das erzeugte Prozessmodell abbilden lassen. Weiterhin wird der Einfluss des Prozesses auf die Wandstärke des gebogenen Rohrs untersucht. Es kann gezeigt werden, dass mithilfe des inkrementellen Rohrumformens die Wandstärke gezielt eingestellt werden kann. Abschließend werden mögliche Anwendungsbeispiele dargestellt, welche die Vorteile des Verfahrens gegenüber konventionellen Biegeverfahren zeigen. |
![]() |
78 |
Qing Yin Online verfügbar: Link
Der ebene Torsionsversuch ist ein Prüfverfahren für Blechwerkstoffe zur Bestimmung der Umformeigenschaften unter Scherbelastungen. Dieser Versuch hat den Vorteil, dass hohe Deformationen messbar sind. Zudem ist die Beanspruchung der Probe frei von störenden Kerbeffekten. Dennoch ist der ebene Torsionsversuch ein bisher selten verwendetes Verfahren, da die verfügbaren Auswertungsmethoden sehr aufwendig sind. Das Ziel der vorliegenden Dissertation ist die Erarbeitung von neuen Prüf- und Auswertungsmethoden zur Etablierung dieses bisher selten genutzten Prüfverfahrens sowie die Erschließung weiterer Anwendungsmöglichkeiten. |
![]() |
Matthias Haase The direct conversion of aluminum alloy machining chips into finished or semi-finished products by hot extrusion is a promising approach to improve the energy balance of aluminum recycling and to overcome the problem of material loss during remelting. The aluminum chips are compacted to chip-based billets and extruded at an elevated temperature to chip-based aluminum extrudates. However, the mechanical properties of chip-based aluminum extrudates produced with conventional extrusion dies are often inferior compared to those of extruded cast billets. Critical factors to achieve sound bonding of the chips and therefore favorable mechanical properties of the chip-based extrudates, are the shear, pressure and strain affecting the chips during the extrusion process. |
![]() |
|
Daniel Pietzka Der Ausstoß des Klimagases CO2 und der Verbrauch natürlicher Energiequellen führen im Transportwesen zu steigenden Leichtbaubestrebungen, um das Fahrzeuggewicht zu reduzieren. Ein möglicher Ansatz ist die Verwendung von Verbundwerkstoffen. Durch einen Verbund können Werkstoffe mit unterschiedlichen Eigenschaften vorteilhaft miteinander kombiniert werden. Ein vielversprechendes Verfahren zur Herstellung von endlos verstärkten Aluminiumprofilen ist das Verbundstrangpressen. Es werden dabei Verstärkungselemente in spezielle Kammerwerkzeuge geführt, die sich im Werkzeuginneren mit dem Aluminiumblockwerkstoff verbinden. Für Leichtbauwendungen ist bei dem Verfahren ein hoher Anteil der Verstärkungselemente im Profilquerschnitt anzustreben. Allerdings haben die Verstärkungselemente einen Einfluss auf den Prozess, wodurch der maximale Verstärkungsanteil begrenzt ist. Das Hauptziel der vorliegenden Arbeit ist, ein Prozessverständnis, abhängig vom Verstärkungsanteil, zu erlangen. Für die Umsetzung wird der Einfluss der Verstärkungselemente auf den Werkstofffluss und die resultierende Stempelkraft experimentell und numerisch analysiert. Ein analytisches Modell zur Beschreibung der Stempelkraft für das Verbundstrangpressen wurde abgeleitet. |
![]() |
|
Volkan Güley Recycling of aluminum chips by hot extrusion is a metal forming technique, which requires considerably less energy than conventional recycling by remelting. The aluminum chips sorted by alloy type were first chemically washed in a mid-alkaline bath and then completely dried in an industrial furnace, compacted to billets, heated up to extrusion temperature and directly extruded into finished products without remelting. This method utilizes not only significantly less energy compared to conventional recycling by remelting but also prevents the material loss that is typical in remelting of fine aluminum scrap in the form of chips. |
![]() |
|
2013 | ||
Aykut Canpolat Experimentelle und numerische Bewertung der Fließortbestimmung mittels Kreuzzugversuch |
![]() |
|
Mustafa Seckin Aydin Efficient Parameter Characterization for Hardening and Yield Locus Models for Sheet Metals |
![]() |
|
Muhammad Masood Hussain Polymer Injection Sheet Metal Forming – Experiments and Modeling |
![]() |
|
2012 | ||
Ben Khalifa, Nooman: Strangpressen schraubenförmiger Profile am Beispiel von Schraubenrotoren Berichter: Tekkaya, A. E.; Kleiner, M.; Palkowski, H |
|
|
Kloppenborg, Thomas: Analyse- und Optimierungsmethoden für das Verbundstrangpressen Berichter: Brosius, A.; Awiszus, B.; Tekkaya, A. E. |
|
|
Kwiatkowski, Lukas: Engen dünnwandiger Rohre mittels dornlosen Drückens Berichter: Tekkaya, A. E.; Kleiner, M.; Homberg, W. |
|
|
Kolbe, Jörg: Thermisch beschichtete, faserverstärkte Polymerwerkzeuge für die Umformung höherfester Blechwerkstoffe Berichter: Tekkaya, A. E.; Kleiner, M.; Volk, W. |
|
|
Jäger, Andreas: Strangpressen von Aluminiumprofilen mit prozessintegrierter umformtechnischer Weiterverarbeitung |
![]() |
|
Schuster, Andreas: Der Faserverlauf in umgeformten Stählen und seine Auswirkungen auf mechanische Eigenschaften |
![]() |
|
2011 | ||
Pham, Ha-Duong: Prozessauslegung zur Umformung von organisch beschichteten Blechen |
![]() |
|
Rauscher, Boris: Formschlüssig verbundene Metall-Kunststoff-Hybridbauteile durch Integration von Blechumformung und Spritzgießen |
![]() |
|
Cwiekala, Tim: Entwicklung einer Simulationsmethode zur zeiteffizienten Berechnung von Tiefziehprozessen |
![]() |
|
Hermes, Matthias: Neue Verfahren zum rollenbasierten 3D-Biegen von Profilen |
![]() |
|
2010 | ||
Gösling, Marco: Metamodell unterstützte Simulation und Kompensation von Rückfederungen in der Blechumformung |
![]() |
|
Karbasian, Hossein: Formgenauigkeit und mechanische Eigenschaften pressgehärteter Bauteile |
![]() |
|
2005 - 2009 | ||
Risch, Désirée: Energietransfer und Analyse der Einflussparameter der formgebundenen elektromagnetischen Blechumformung |
![]() |
|
Marré, Michael: Grundlagen der Prozessgestaltung für das Fügen durch Weiten mit Innenhochdruck |
![]() |
|
Becker, Dirk: Strangpressen 3D-gekrümmter Leichmetallprofile |
![]() |
|
Trompeter, Michael: Hochdruckblechumformung großflächiger Blechformteile |
![]() |
|
Psyk, Verena: Prozesskette Krümmen - Elektromagnetische Komprimieren - Innenhochdruckumformung für Rohre und profilförmigen Bauteile |
![]() |
|
Shankar, Ravi: Surface Reconstruction and Tool Path Strategies for Incremental Sheet Metal Forming |
![]() |
|
Ridane, Nader: FEM-gestützte Prozessregelung des Freibiegens |
![]() |
|
Dirksen, Uwe: Testumgebung zur Untersuchung von Prozessregelungen für das Drei-Rollen-Biegen mit virtuellem und realem Biegeprozess |
![]() |
|
Schomäcker, Michael: Verbundstrangpressen von Aluminiumprofilen mit endlosen metallischen Verstärkungselementen |
![]() |
|
Brosius, Alexander: Verfahren zur Ermittlung dehnratenabhängiger Fließkurven mittels elektromagnetischer Rohrumformung und iterativer Finite-Element-Analysen |
![]() |
|
Ewers, Roland: Prozessauslegung und Optimierung des CNC-gesteuerten Formdrückens |
![]() |
|
Langhammer, Thorsten: Untersuchungen zu neuen Konzepten für PKW-Kraftstoffbehälter |
![]() |
|
Schikorra, Marco: Modellierung und simulationsgestützte Analyse des Verbundstrangpressens |
![]() |
|
2000 - 2004 | ||
Beerwald, Charlotte: Grundlagen der Prozessauslegung und -gestaltung bei der elektromagnetischen Umformung |
![]() |
|
Jadhav, Sanjay: Basic Investigations of the Incremental Sheet Metal Forming Process on a CNC Milling Machine |
![]() |
|
Klimmek, Christian: Statistisch unterstützte Methodenplanung für die Hochdruck-Blechumformung |
![]() |
|
Krux, Rainer: Herstellung eigenschaftsoptimierter Bauteile mit der Hochdruck-Blechumformung und Analyse der induzierten Eigenspannungen |
![]() |
|
Wellendorf, Axel: Untersuchungen zum konventionellen und wirkmedienbasierten Umformen von komplexen Feinstblechteilen |
![]() |
|
Heller, Burkhard: Halbanalytische Prozess-Simulation des Freibiegens von Fein- und Grobblechen |
![]() |
|
Klaus, Alexander: Verbesserung der Fertigungsgenauigkeit und der Prozesssicherheit des Rundens beim Strangpressen |
![]() |
|
Hellinger, Volker: Untersuchungen zur Methodik der Berechnung und Herstellung von leichten Stützkernverbunden |
![]() |
|
Rohleder, Martin: Simulation rückfederungsbedingter Formabweichungen im Produktentstehungsprozess von Blechformteilen |
![]() |
|
Homberg, Werner: Untersuchungen zur Prozessführung und zum Fertigungssystem bei der Hochdruckblechumformung |
||
1995 - 1999 | ||
Arendes, D.: Direkte Fertigung gerundeter Aluminiumprofile beim Strangpressen |
||
Austerhoff, N.: Integrierte Produkt- und Prozessgestaltung für die Herstellung von Blechbiegteilen |
||
Kolleck, R.: Finite-Element-Simulation wirkmedienbasierter Blechumformverfahren als Teil einer virtuellen Fertigung |
||
Weidner, T.: Untersuchungen zu Verfahren und Werkzeugsystemen der wirkmedienbasierten Blechumformung |
||
Haase, F.: Eigenspannungen an dünnwandigen Bauteilen und Schichtverbunden |
||
Chatti, S.: Optimierung der Fertigungsgenauigkeit beim Profilbiegen |
||
Szücs, E.: Einsatz der Prozesssimulation bei der Entwicklung eines neuen Umformverfahrens - der Hochdruckblechumformung |
||
Keßler, L.: Simulation der Umformung organisch beschichteter Feinbleche und Verbundwerkstoffe mit der FEM |
||
Smatloch, Ch.: Entwicklung eines numerisch einstellbaren Werkzeugsystems für das Tief- und Streckziehen |
||
Straßmann, T.: Prozessführung für das Walzrunden auf der Basis Neuronaler Netze |
||
Sulaiman, H.: Erweiterung der Einsetzbarkeit von Gesenkbiegepressen durch die Entwicklung von Sonderwerkzeugen |
||
Warstat, R.: Optimierung der Produktqualität und Steigerung der Flexibilität beim CNC-Schwenkbiegen |
||
1990 - 1994 | ||
Greve, A.: Wissens- und datenbankbasiertes Beratungssystem für die FE-Simulation von Umformprozessen Reihe: Prozesssimulation in der Umformtechnik ( PSU ) Nr. 7; Herausgeber: Lange, K.; Springer-Verlag Berlin Heidelberg 1994. |
||
Maevus, F.: Rechnerintegrierte Blechteilefertigung am Beispiel des Gesenkbiegens |
||
Reil, G.: Prozessregelung numerisch gesteuerter Umformmaschinen mit Fuzzy Logic |
||
Adelhof, A.: Komponenten einer flexiblen Fertigung beim Profilrunden |
||
Dierig, H.: CNC-Drücken mit adaptiver Regelung Fortsch. Ber. VDI Reihe 2 Nr.252, VDI-Verlag Düsseldorf 1992. |
||
Schilling, R.: Finite-Elemente-Analyse des Biegeumformens von Blechen Reihe: Prozesssimulation in der Umformtechnik ( PSU ) Nr. 2; Herausgeber: Lange, K.; Springer-Verlag Berlin Heidelberg 1992. |
||
Fait, J.: Technologische Grundlagenuntersuchungen zur Erhöhung der Flexibilität des Schwenkbiegens Fortschr. Ber. VDI Reihe 2 Nr.207, VDI-Verlag Düsseldorf 1990. |
||
Liewald, M.: Prozessführung numerisch gesteuerter Umformprozesse mittels algorithmischer und wissensbasierter Regler Fortschr. Ber. VDI Reihe 2 Nr.211, VDI-Verlag Düsseldorf 1990. |
||
Rothstein, R.: Einsatz der Prozesssimulation zur Analyse und Weiterentwicklung von Gesenkbiegeverfahren Fortschr. Ber. VDI Reihe 2 Nr. 194, VDI-Verlag Düsseldorf 1990. |
||
Steininger, V.: Eine Untersuchung zur FE-Simulation von Gesenkschmiedeprozessen Fortschr. Ber. VDI Reihe 2 Nr. 195, VDI-Verlag Düsseldorf 1990. |
2020 | |
Gallus, S., Wernicke, S., Hahn, M., Tekkaya, A. E., 2020. Erweiterung der Prozessgrenzen beim Inkrementellen Blechmassivumformen durch Thermisches Gradieren der Halbzeuge. Extended Abstract. In: Tagungsband des 23. Umformtechnischen Kolloquiums Hannover – Innovationspotenziale in der Umformtechnik, pp. 166-167. | |
Kleinschnittger, O., Strenger, N., Petermann, M., Frerich, S., Grodotzki, J., Selvaggio, A., Tekkaya, A. E., 2020. Remote Laboratories in Engineering Education − Deriving Guidelines for their Implementation and Operation. In: Proceedings of the 48th Annual Conference of European Society for Engineering Education (SEFI) online, pp. 251-259. | |
Kotzyba, P., Grötzinger, K. C., Hering, O., Liewald, M., Tekkaya, A. E., 2020. Introduction of Composite Hot Extrusion with Tubular Reinforcements for Subsequent Cold Forging. In: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, Germany, DOI: 10.1007/978-3-662-62138-7_20. | |
Mogylenko, O., Selvaggio, A., Upadhya, S., Grodotzki, J., Tekkaya, A. E., 2020. Augmented Reality Application for the Mobile Measurement of Strain Distributions. In: Proceedings of the 17th International Conference on Remote Engineering and Virtual Instrumentation, DOI: 10.1007/978-3-030-52575-0_19. | |
Tekkaya, A. E., Gitschel, R., Meya, R., Hering, O., 2020. Schädigungsgesteuerte Umformprozesse. In: Tagungsband des 34. Aachener Stahlkolloquiums, pp. 19-28. | |
Upadhya, S., Grodotzki, J., Selvaggio, A., Mogylenko, O., Tekkaya, A. E, 2020. Remote Lab to Illustrate the Influence of Process Parameters on Product Properties in Additive Manufacturing. In: Proceedings of the 17th International Conference on Remote Engineering and Virtual Instrumentation, DOI: 10.1007/978-3-030-52575-0_37. | |
Wernicke, S., Hahn, M., Tekkaya, A. E., 2020. Herstellung Belastungsangepasster Funktionsbauteile Mittels Inkrementeller Blechmassivumformung. Extended Abstract. In: Tagungsband des 23. Umformtechnischen Kolloquiums Hannover – Innovationspotenziale in der Umformtechnik, pp. 164-165. | |
2019 | |
Bellmann, J., Lueg-Althoff, J., Schulze, S., Hahn, M., Gies, S., Beyer, E., Tekkaya, A. E., 2019. Magnetic pulse welding of tubular parts. In: AIP Conference Proceedings 2113, Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz, Spain, DOI: 10.1063/1.5112579. | |
Bellmann, J., Schettler, S., Dittrich, S., Lueg-Althoff, J., Schulze, S., Hahn, M., Beyer, E., Tekkaya, A. E., 2019. Experimental study on the magnetic pulse welding process of large aluminum tubes on steel rods. Materials Science and Engineering 480, DOI: 10.1088/1757-899X/480/1/012033. | |
Bellmann, J., Ueberschaer, F., Lueg-Althoff, J., Schulze, S., Hahn, M., Beyer, E., Tekkaya, A. E., 2019. Effect of the Forming Behavior on the Impact Flash during Magnetic Pulse Welding of Tubes. In: Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, New Hampshire, USA, pp. 651-654. | |
Clausmeyer, T., Nürnberger, F., Gutknecht, F., Isik, K., Besserer, H., Gerstein, G., Wernicke, S., Schulte, R., Tekkaya, A. E., Merklein, M., Maier, H., 2019. Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung. 4. Workshop Blechmassivumformung, Erlangen, Germany, pp. 33-60. | |
Coppieters, S., Jäckel, M., Miyake, N., Kraus, C., Traphöner, H., Kuwabara, T., Tekkaya, A. E., 2019. Large Strain Flow Curve Identification for sheet metal: Process-Informed Method Selection. In: Proceedings of 12th Forming Technology Forum, Herrsching am Ammersee, Germany, (Digital). | |
Dardaei Joghan, H., Hahn, M., Traphöner, H., Tekkaya, A. E., 2019. Influence of the preheating strategy on the deep drawing of extruded magnesium alloy ME20 sheets. In: Proceedings of the 38th International Deep Drawing Research Group (IDDRG) Annual Conference, Enschede, The Netherlands, (Digital). | |
Dardaei Joghan, H., Izadyar, S. A., Hahn, M., Tekkaya, A. E., 2019. Effect of the unbending process on mechanical properties before and after flattening of extruded open tubes of magnesium alloy ME20. In: AIP Conference Proceedings 2113, Proceedings of the 22nd International ESAFORM Conference on Material Forming Vitoria-Gasteiz, Spain, DOI: 10.1063/1.5112707. | |
Gutknecht, F., Clausmeyer, T., 2019. Analysis of strain-path change indicator for application in sheet-bulk metal forming. In: Proceedings of 12th Forming Technology Forum, 19.-20.09.2019, Herrsching am Ammersee, Germany, (Digital). | |
Gutknecht, F., Vogel, M., Schulte, R., Merklein, M., Rosenbusch, D., Koch, S., Hübner, S., Behrens, B., Tekkaya, A. E., Clausmeyer, T., 2019. Comparison of strain-path indicators for analysis of processes in sheet-bulk metal forming. In: Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, New Hampshire, USA, pp. 123-126. | |
Hahn, M., Goyal, S., Gies, S., Tekkaya, A. E., 2019. Numerical Modeling of Energy Deposition for Vaporizing foil actuator Forming. In: Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, New Hampshire, USA, pp. 667-670. | |
Hering, O., Kolpak, F., Dahnke, C., Tekkaya, A. E., 2019. High Strain Flow Curves by Mechanical Tests on Specimens Pre-strained by Forward Rod Extrusion. In: Proceedings of 52nd ICFG Plenary Meeting 2019, Donostia-San Sebastián, Spain, pp. 149-156. | |
Hoffmann, E., Kamaliev, M., Löbbe, C., Tekkaya, A. E., 2019. Enhanced process limits in the granular media-based tube forming through axial feeding. In: 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel CHS, Luleå, Sweden, pp. 95-102. | |
Kolpak, F., Hering, O., Dahnke, C., Tekkaya, A. E., 2019. Producing Hollow Shafts by Composite Extrusion Utilizing Granular Cores. In: Proceedings of 52nd ICFG Plenary Meeting 2019, Donostia-San Sebastián, Spain, pp. 225-232. | |
Kolpak, F., Dahnke, C., Tekkaya, A. E., 2019. Forming-induced anisotropy of product properties in cold extrusion. In: Proceedings of the METEC and 4th European Steel Technology and Application Days, Düsseldorf, Germany, (Digital). | |
Lueg-Althoff, J., Bellmann, J., Hahn, M., Schulze, S., Tekkaya, A. E., Beyer, E., 2019. Joining Dissimilar Thin-Walled Tubes by Magnetic Pulse Welding. In: Book of abstracts of 1st International Conference on Advanced Joining Processes, Ponta Delgada, Azores, p. 54. | |
Lueg-Althoff, J., Beu, M.-A., Güzel, A., Rohr, T., Hahn, M., 2019. Experimental and numerical investigations of joining by electromagnetic forming for aeronautical applications. In: AIP Conference Proceedings 2113, Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz, Spain, DOI: 10.1063/1.5112576. | |
Maaß. F., Dobecki, M., Hahn, M., Reimers, W., Tekkaya, A. E., 2019. Setting Component Properties in Incremental Forming. In: Proceedings of MS&T 2019, Portland, USA, pp. 1176-1182. | |
Maaß, F., Hahn, M., Dobecki, M., Thannhäuser, E., Tekkaya, A. E., Reimers, W., 2019. Influence of tool path strategies on the residual stress development in single point incremental forming. Procedia Manufacturing 29, pp. 53-59. | |
Maaß, F., Hahn, M., Tekkaya, A. E., Dobecki, M., Poeche, A., Brommelhoff, K., Reimers, W., 2019. Forming mechanisms-related residual stress development in single point incremental forming. Production Engineering – Research and Development 13 (2), DOI: 10.1007/s11740-018-0867-3. | |
Martschin, J., Meya, R., Löbbe, C., Tekkaya, A. E., 2019. Novel roll stand for flexible profile bending. In: Proceedings of the 38th International Deep Drawing Research Group (IDDRG) Annual Conference, Enschede, The Netherlands, (Digital). | |
Mennecart, T., Gies, S., Ben Khalifa, N., Tekkaya, A. E., 2019. Analysis of the Influence of Fibers on the Formability of Metal Blanks in Manufacturing Processes for Fiber Metal Laminates. Journal of Manufacturing and Materials Processing 3 (1), DOI: 10.3390/jmmp3010002. | |
Münstermann, S., Sparrer, Y., Yao, Y., Lian, J., Meya, R., Clausmeyer, T., Tekkaya, A. E., 2019. Effect of plastic strain and ductile damage on elastic modulus of multiphase steel and its impact on springback prediction. In: AIP Conference Proceedings 2113, Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz, Spain, DOI: 10.1063/1.5112739. | |
Rosenthal, S., Hahn, M., Tekkaya, A. E, 2019. Simulation approach for three-point plastic bending of additively manufactured Hastelloy X sheets. Procedia Manufacturing 34, pp. 475–481, DOI: 10.1016/j.promfg.2019.06.201. | |
Schowtjak, A., Kusche, C., Meya, R., Al-Samman, T., Korte-Kerzel, S., Tekkaya, A. E., Clausmeyer, T., 2019. Prediction of void evolution in sheet bending based on statistically representative microstructural data for the Gurson-Tvergaard-Needleman model. In: Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, New Hampshire, USA, pp. 311-314. | |
Selvaggio, A., Upadhya, S., Grodotzki, J., Tekkaya, A. E., 2019. Development of a Remote Compression Test Lab for Engineering Education. In: Proceedings of the 16th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bengaluru, India, pp. 496-505. | |
Tebaay, L. M., Sieczkarek, P., Hahn, M., Gies, S., Tekkaya, A. E., 2019. Development of the Incremental Micro-Forming Process for small batch production of metallic bipolar plates. In: Ideen Form geben. 33. ASK Umformtechnik, Aachen, Germany, pp. 347-357. | |
Tekkaya, A. E., Traphöner, H., Hering, O., Kolpak, F., Gutknecht, F., Schowtjak, A., 2019. Über die klassische Werkstoffprüfung hinaus – Werkstoffeigenschaften für die moderne Umformtechnik. In: DGM dIALOG – Materialwissenschaften und Werkstofftechnik – Werkstoffprüfung 2, pp. 26-31. | |
Ünsal, I., Hirtler, M., Svirodov, A., Bambach, M., Hama-Saleh, R., Weisheit, A., Schleifenbaum, J. H., Kamaliev, M., Tekkaya, A. E., 2019. Investigation of martensite-transformation and forming properties of additively reinforced 22MnB5 sheet metals. In: AIP Conference Proceedings 2113, Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz, Spain, DOI: 10.1063/1.5112735. | |
Upadhya, S., Selvaggio, A., Ortelt, T. R., Grodotzki, J., Tekkaya, A. E., 2019. Development of a Remote Tube Bending Lab to Illustrate Springback and Determine Process Limits. In: Proceedings of the 16th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bengaluru, India, pp. 95-106. | |
Weber, F., Hahn, M., Tekkaya, A. E., 2019. Joining by die-less hydroforming with outer pressurization. In: Book of abstracts of 1st International Conference on Advanced Joining Processes, Ponta Delgada, Azores, pp. 56. | |
Wernicke, S., Gies, S., Tekkaya, A. E., 2019. Manufacturing of hybrid gears by incremental sheet-bulk metal forming. Procedia Manufacturing 27, pp. 152–157, DOI: 10.1016/j.promfg.2018.12.058. | |
2018 | |
Bellmann, J., Lueg-Althoff, J., Schulze, S., Gies, S., Beyer, E., Tekkaya, A. E., 2018. Effects of Reactive Interlayers in Magnetic Pulse Welding. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA. | |
Chen, H., Löbbe, C., Staupendahl, D., Tekkaya, A. E., 2018. Development of a Procedure for Forming Assisted Thermal Joining of Tubes. In: Proceedings of the 21st International ESAFORM Conference on Material Forming, Palermo, Italy, DOI: 10.1063/1.5034879. | |
Dahnke, C., Tekkaya, A. E., 2018. Influence of the Manufacturing Process on Hot Extruded Shape Memory Alloy Metal Matrix Composites. In: Proceedings of the ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2018, San Antonio, USA, DOI: 10.1115/SMASIS2018-7934. | |
Gerstein, G., Briukhanov, A., Gutknecht, F., Volchok, N., Clausmeyer, T., Nürnberger, F., Tekkaya, A. E., Maier, H. J., 2018. Evaluation of Micro-Damage by Acoustic Methods. In: Procedia Manufacturing 15 (17th International Conference on Metal Forming), Toyohashi, Japan, pp. 527-534. | |
Gies, S., Tekkaya, A. E., 2018. Design of Hybrid Conductors for Electromagnetic Forming Coils. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA. | |
Grodotzki, J., Ortelt, T. R., Tekkaya, A. E., 2018. Remote and Virtual Labs for Engineering Education 4.0 – Achievements of the ELLI project at the TU Dortmund University. In: Procedia Manufacturing (46th SME North American Manufacturing Research Conference), Texas, USA, pp. 1349-1360. | |
Gutknecht, F., Gerstein, G., Traphöner, H., Clausmeyer, T., Nürnberger, F., 2018. Experimental Setup to Characterize Flow-Induced Anisotropy of Sheet Metals. In: Proceedings of the 37th International Deep-Drawing Research Group Conference, Waterloo, Canada, DOI: 10.1088/1757-899X/418/1/012085. | |
Hahn, M., Hansen, S. R. , Gies, S., Vivek, A., Daehn, G. S., Tekkaya, A. E., 2018. Prediction of Achievable Energy Deposition for Vaporizing Foil Actuators. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA. | |
Hering, O., Dahnke, C., Ben Khalifa, N., Tekkaya, A. E., 2018. Analysing damage evolution in cold forging by means of triaxiality and lode parameter. 8th JSTP International Seminar on Precision Forging. 05.-08.03.2018, Nagoya, Japan, pp. 121-124. | |
Hering, O., Dahnke, C., Tekkaya, A. E., 2018. Influence of Damage on the Properties of Cold Forged Parts. In: Proceedings of 51st ICFG Plenary Meeting, Columbus, USA, pp. 137-144. | |
Hoffmann, J., Komodromos, A., Fleischer, J., Tekkaya, A. E., 2018. Optimization of the Linear Coil Winding Process by Combining New Actuator Principles on the Basis of Wire Forming Analysis. In: Electric Drives Production Conference, Schweinfurt, Germany, pp. 11-16. | |
Joghan, H. D., Staupendahl, D., ul Hassan, H., Henke, A., Keesser, T., Legat, F., Tekkaya, A. E., 2018. Investigation of the Effects of Process and Geometrical Parameters on Formability in Tube Hydroforming Using a Modular Hydroforming Tool. In: Proceedings of the 21st International ESAFORM Conference on Material Forming, Palermo, Italy, DOI: 10.1063/1.5035009. | |
Kolpak, F., Dahnke, C., Tekkaya, A. E., 2018. Influence of the Bauschinger Effect on the product properties of cold forged parts. 8th JSTP International Seminar on Precision Forging. 05.-08.03.2018, Nagoya, Japan, pp.73-76 | |
Kolpak, F., Dahnke, C., Tekkaya, A. E., 2018. Prediction of Product Properties in Cold Forging Considering the Bauschinger Effect. In: Proceedings of the 51st ICFG Plenary Meeting, Columbus, USA, pp. 159-166. | |
Komodromos, A., Tekkaya, A. E., Hofmann, J., Fleischer, J., 2018. Experimental and numerical investigations of wire bending by linear winding of rectangular tooth coils. ESAFORM. 23.-25.04.2018, Palermo, Italy. | |
Levin, E., Larour, P., Heuse, M., Staupendahl, D., Clausmeyer, T., Tekkaya, A. E., 2018. Influence of Cutting Tool Stiffness on Edge Formability. In: Proceedings of the 37th International Deep-Drawing Research Group Conference, Waterloo, Canada, DOI: 10.1088/1757-899X/418/1/012061. | |
Lueg-Althoff, J., Schilling, B., Bellmann, J., Gies, S., Hahn, M., Schulze, S., Tekkaya, A. E., Beyer, E., 2018. Influence of the Free Compression Stage on Magnetic Pulse Welding of Tubes. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA. | |
Maaß, S., Gies, S., Dobecki, M., Brömmelhoff, K., Tekkaya, A. E., Reimers, W., 2018. Analysis of residual stress state in sheet metal parts processed by single point incremental forming. ESAFORM, 23.-25.04.2018, Palermo, Italy. | |
Mennecart, T., Werner, H., Ben Khalifa, N., Weidenmann, K. A., 2018. Developments and Analyses of Alternative Processes for the Manufacturing of Fiber Metal Laminates. In: Proceedings of the 13th Manufacturing Science and Engineering Conference (MSEC2018), College Station, USA, DOI: 10.1115/MSEC2018-6447. | |
Meya, R., Löbbe, C., Tekkaya, A. E., 2018. Stress State Control by a Novel Bending Process and its Effect on Damage Evolution. In: Proceedings of the 13th Manufacturing Science and Engineering Conference, College Station, USA, DOI: 10.1115/MSEC2018-6349. | |
Napierala, O., Dahnke, C., Tekkaya, A. E., 2018. Presentation of Combined Deep Drawing and Cold Forging. In: Proceedings of the 51st ICFG Plenary Meeting, Columbus, USA, pp. 185-192. | |
Nazari, E., Löbbe, C., Gallus, S., Izadyar, A. S., Tekkaya, A. E., 2018. Design of process parameters for the incremental tube forming (ITF) by FEM to control product properties. ESAFORM. 23.-25.04.2018, Palermo, Italy. | |
Schiffeler, N., Grodotzki, J., Ortelt, T. R., Stehling, V., Isenhardt, I., Tekkaya, A. E., 2018. Virtual und Augmented Reality in der MINT-Lehre – Good Practice-Beispiele aus dem Projekt ELLI 2. In: Proceedings of DeLFI 2018 (Die 16. E-Learning Fachtagung Informatik), Frankfurt am Main, Germany, pp. 293-294. | |
Tekkaya, A. E., Schowtjak, A., Clausmeyer, T., 2018. Damage in Metal Forming. 8th JSTP International Seminar on Precision Forging. 05.-08.03.2018, Nagoya, Japan, pp. 21-26. | |
Upadhya, S., Staupendahl, D., Heuse, M., Tekkaya, A. E., 2018. Improved Failure Prediction in Forming Simulations through Pre-strain Mapping. In: Proceedings of the 21st International ESAFORM Conference on Material Forming, Palermo, Italy, DOI: 10.1063/1.5034939. | |
Wernicke, S., Gies, S., Dang, T., Tekkaya, A. E., 2018. Effect of multiple forming tools on geometrical and mechanical properties in incremental sheet forming. ESAFORM. 23.-25.04.2018, Palermo, Italy. | |
2017 | |
Chen, H., Staupendahl, D., Hiegemann, L., Tekkaya, A. E., 2017. Increasing the formability of ferritic stainless steel tube by granular medium-based hot forming. In: Journal of Physics: Conference Series 896, 36th IDDRG Conference – Materials Modelling and Testing for Sheet Metal Forming, Munich, Germany, DOI:10.1088/1742-6596/896/1/012009. | |
Dahnke, C., Kolpak, F., Kloppenborg, T., Tekkaya, A. E., 2017. Manufacturing of reinforced profiles by means of combined continuous and discontinuous composite extrusion. In: Proceedings of the ICEB 2017, Verona, Italy, (Digital). | |
Dahnke, C., Shapovalov, A., Tekkaya, A. E., 2017. Thermally activated lightweight actuator based on hot extruded shape memory metal matrix composites (SMA-MMC). In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 1511-1516. | |
Doig, M., Isik, K., Clausmeyer, T., Heibel, S., Richter, H., Tekkaya, A. E., 2017. Material Characterization and Validation Studies for Modeling Ductile Damage during Deep Drawing. In: Proceedings of the 17th International Conference on Sheet Metal, Palermo, Italy, pp. 77-82. | |
Doig, M., Isik, K., Clausmeyer, T., Richter, H., Heibel, S., Tekkaya, A. E., 2017. Material characterization and parameter optimization for a damage model. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Gerstein, G., Clausmeyer, T., Gutknecht, F., Tekkaya, A. E., Nürnberger, F., 2017. Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths. In: TMS 2017, 146th Annual Meeting & Exhibition Supplemental Proceedings, San Diego, USA, pp. 203-210. | |
Gerstein, G., Isik, K., Gutknecht, F., Sieczkarek, P., Ewert, J., Tekkaya, A. E., Clausmeyer, T., Nürnberger, F., 2017. Microstructural characterization and simulation of damage for geared sheet components. In: Journal of Physics: Conference Series 896, 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming, Munich, Germany, DOI:10.1088/1742-6596/896/1/012076. | |
Gies, S., Tekkaya, A. E., 2017. Effect of workpiece deformation on Joule heat losses in electromagnetic forming coils. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 341-346. | |
Gutknecht, F., Isik, K., Clausmeyer, T., Tekkaya, A. E., 2017. Comparison of Gurson and Lemaitre model in the context of blanking simulation of a high strength steel. In: Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications COMPLAS 2017, Barcelona, Spain, pp. 163-173. | |
Gutknecht, F., Isik, K., Clausmeyer, T., Tekkaya, A. E., Gerstein, G., Nürnberger, F., 2017. Vorhersage von Schädigung in der Blechmassivumformung. In: 22. Umformtechnisches Kolloquium, Hannover, Germany, p. 220, (Poster). | |
Grodotzki, J., Ortelt, T. R., Tekkaya, A. E., 2017. Development of a FEM-Lab for the virtual experimentation in forming processes. In: 4th Experiment@ International Conference Online Experimentation, Faro, Portugal, pp. 123-124. | |
Grodotzki, J., Selvaggio, A., Ortelt, T. R., Tekkaya, A. E., 2017. Demonstration of Deep Drawing Experiments in a Remote Lab Environment. In: 4th Experiment@ International Conference Online Experimentation, Faro, Portugal, pp. 141-142. | |
Grzancic, G., Hiegemann, L., Ben Khalifa, N., 2017. Investigation of new tool design for incremental profile forming. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 1767-1772. | |
Heibel, S., Nester, W., Clausmeyer, T., Tekkaya, A. E., 2017. Failure assessment in sheet metal forming using a phenomenological damage model and fracture criterion: experiments, parameter identification and validation. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 2066-2071. | |
Heibel, S., Nester, W., Clausmeyer, T., Tekkaya, A. E., 2017. Influence of different Yield Loci on Failure Prediction with Damage Models. In: Journal of Physics: Conference Series, Volume 896, 36th IDDRG Conference – Materials Modelling and Testing for Sheet Metal Forming, Munich, Germany, DOI :10.1088/1742-6596/896/1/012081. | |
Hering, O., Ossenkemper, S., Dahnke, C., Tekkaya, A. E., Nadolski, D., Schulz, A., Zoch, H.-W., 2017. Distortion Induced by Cold Forging and Subsequent Heat Treatment. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Hijazi, D., Traphöner, H., Staupendahl, D., Clausmeyer, T., Tekkaya, A. E., 2017. Characterization of planar anisotropy, hardening and fracture of tubular materials by a modified in-plane torsion test. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Kamaliev, M., Löbbe, C., Hiegemann, L., Tekkaya, A. E., 2017. Potenziale der akustischen Sensorik zur prozessbegleitenden Zustandsüberwachung beim Presshärten. In: 12. Erlanger Workshop Warmblechumformung 2017, Fürth, Germany, pp. 43-54. | |
Kolpak, F., Dahnke, C., Tekkaya, A. E., 2017. Numerical Prediction of the Process Limits of Aluminum Chip Extrusion. In: WGP Jahreskongress 2017, Aachen, Germany, pp. 481-486. | |
Kolpak, F., Schwane, M., Dahnke, C., Tekkaya, A. E., 2017. Improved property prediction of cold forged components by means of enhanced material models. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Komodromos, A., Löbbe, C., Tekkaya, A. E., 2017. Development of forming and product properties of copper wire in a linear coil winding process. In: 2017 7th International Electric Drives Production Conference (E|DPC), Würzburg, Germany, pp. 13-18. | |
Kruse, D., Kuska, R., Frerich, S., May, D., Ortelt, T. R., Tekkaya, A. E., 2017. More Than “Did You Read the Script?”, In: REV2017 Proceedings – International Conference on Remote Engineering and Virtual Instrumentation, New York, USA, pp. 160-169. | |
Löbbe, C., Hater, S., Kamaliev, M., Hiegemann, L., Tekkaya, A. E., 2017. Sheet Metal Forming in Progressive Dies Assisted by Rapid Induction Heating: Setting of Springback and Product Properties. In: 6th International Conference Proceedings Hot Sheet Metal Forming of High Performance Steel, Atlanta, USA, pp. 649-662. | |
Maaß, F., Gies, S., Tekkaya, A.E., 2017. Deformation Characteristics of Thermoplastics in Single Point Incremental Forming. In: AIP Conference Proceedings 1896, Dublin, Ireland, DOI: 10.1063/1.5008050. | |
Mennecart, T., Hiegemann, L., Ben Khalifa, N., 2017. Analysis of the forming behaviour of in-situ drawn sandwich sheets. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 890-895. | |
Meya, R., Löbbe, C., Hering, O., Tekkaya, A. E., 2017. New Bending Process with Superpostition of Radial Stresses for Damage control. In: 10th Forming Technology Forum Model Based Control for Smart Forming Processes, Enschede, The Netherlands, pp. 81-85. | |
Napierala, O., Ben Khalifa, N., Tekkaya, A. E., Missal, N., Felde, A., Liewald, M., 2017. Numerical Analysis of Manufacturing Load-Tailored Components by Cold. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Ortelt, T. R., Tekkaya, A. E., 2017. Engineering Education 4.0 – Teaching for Industry 4.0. In: Proceedings of the 8th Zwick Academia Day 2017, Hong Kong. | |
Ortelt, T. R., Ruider, E., Tekkaya, A. E., 2017. Virtual Lab for Material Testing using the Oculus Rift. In: 4th Experiment@ International Conference Online Experimentation, Faro, Portugal, pp. 145-146. | |
Ossenkemper, S., Dahnke, C., Ben Khalifa, N., Tekkaya, A. E., 2017. Composite Cold Forging – Producing Steel-Aluminum-Composite Shafts with Conventional Cold Forging Tools. In: Proceedings of the 50th ICFG Plenary Meeting, Shanghai, China, pp. 183-191. | |
Schmitz, F., Winter, S., Clausmeyer, T., Even, D., Colasse, C., Tekkaya, A. E., Wagner, M. F., 2017. Materials science-based simulation strategies for the adiabatic cutting process. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Schowtjak, A., Clausmeyer, T., Tekkaya, A. E., 2017. Analysis of Damage and Fracture formulations in Cold Extrusion. In: Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications COMPLAS 2017, Barcelona, Spain, pp. 196-207. | |
Schulze, A., Dahnke, C., Tekkaya, A. E., 2017. Developments in composite extrusion of complex profiles for automotive applications. In: Proceedings of the ICEB 2017, Verona, Italy, (Digital). | |
Sieczkarek, P., Gies, S., Ben Khalifa, N., Tekkaya, A. E., 2017. Wirtschaftliche inkrementelle Blechmassivumformung. In: 22. Umformtechnisches Kolloquium, Hannover, Germany, p. 225, (Poster). | |
Sieczkarek, P., Wernicke, S., Gies, S., Tekkaya, A. E., 2017. Incremental Sheet-Bulk Metal Forming – Overview on the development of a new forming technology. In: Proceedings of the 50th ICFG Plenary Meeting, Shanghai, China, pp. 196-205. | |
Staupendahl, D., Tekkaya, A. E., 2017. The reciprocal effects of bending and torsion on springback during 3D bending of profiles. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 2322-2327. | |
Staupendahl, D., Tekkaya, A. E., 2017. Inline-measurement of complex profile contours for the generation of process parameters used in 3D-bending. In: SCT 2017 Proceedings, Amsterdam, The Netherlands, (Digital). | |
Strenger, N., May, D., Ortelt, T. R., Kruse, D., Frerich, S., Tekkaya, A. E., 2017. Internationalization and Digitalization in Engineering Education. In: Proceedings of the 3rd International Conference on Higher Education Advances, Valencia, Spain, pp. 558-565. | |
Sumikawa, S., Ishiwatari, A., Hiramoto, J., Yoshida, F., Clausmeyer, T., Tekkaya, A. E., 2017. Stress state dependency of unloading behavior in high strength steels. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp. 179-184. | |
Traphöner, H., Clausmeyer, T., Tekkaya, A. E., 2017. Material characterization for plane and curved sheets using the in-plane torsion test – an overview. In: Procedia Engineering 207: 12th International Conference on Technology of Plasticity, Cambridge, United Kingdom, pp.1934-1939. | |
Wernicke, S., Gies, S., Ben Khalifa, N., Tekkaya, A. E., 2017. Herstellung von belastungsangepassten Funktionsbauteilen mittels inkrementeller Blechmassivumformung. In: 22. Umformtechnisches Kolloquium, Hannover, Germany, pp. 215-216, (Poster). | |
Wernicke, S., Sieczkarek, P., Grodotzki, J., Gies, S., Ben Khalifa, N., Tekkaya, A. E., 2017. Material Flow Analysis for The Incremental Sheet-Bulk Gearing by Rotating Tools. In: ASME 2017, 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, Los Angeles, CA, USA, DOI:10.1115/MSEC2017-3029. | |
Winter, S., Schmitz, F., Clausmeyer, T., Tekkaya, A. E., Wagner, M. F.-X., 2017. High temperature and dynamic testing of AHSS for an analytical description of the adiabatic cutting process. In: IOP Conference Series: Materials Science and Engineering 181, 19th Chemnitz Seminar on Materials Engineering, Chemnitz, Germany, DOI: 10.1088/1757-899X/181/1/012026. | |
2016 | |
Beese, S., Beyer, F., Blum, H., Isik, K., Kumor, D., Rademacher, A., Tekkaya, A. E., Willner, K., Wriggers, P., Zeller, S., Löhnert S., 2016. Simulation of Sheet-Bulk Metal Forming Processes with Simufact.forming using User-Subroutines. In: ESAFORM 2016, AIP Conference Proceedings. Nantes, France, DOI: http://dx.doi.org/10.1063/1.4963457. | |
Becker, C., Chatti, S., Grzancic, G., Tekkaya, A. E., 2016. New Process for Flexible Manufacturing of Bent Parts with Variable Arbitrary Cross Section. In: ESAFORM 2016, AIP Conference Proceedings. Nantes, France, DOI: http://dx.doi.org/10.1063/1.4963541. | |
Behrens, B. A., Bouguecha, A., Huskic, A., Diefenbach, J., Labanova, N., Tekkaya, A. E., Ben Khalifa N., Napierala, O., 2016. Herstellung von Leichtbauteilen aus Stahl mittels der Massivumformung, In: XXXV. Verformungskundliches Kolloquium, Zauchensee, Austria, pp. 129-134. | |
Bellmann, J., Lueg-Althoff, J., Goebel, G., Gies, S., Beyer, E., Tekkaya, A. E., 2016. Effects of Surface Coatings on the Joint Formation during Magnetic Pulse Welding in Tube-to-Cylinder Configuration. In: ICHSF 2016, Dortmund, Germany, pp. 279–288. | |
Bellmann, J., Lueg-Althoff, J., Kirchhoff, G., Schulze, S., Gies, S., Beyer, E., Tekkaya, A. E., 2016. Magnetic Pulse Welding: Joining Within Microseconds – High Strength Forever. In: 10th International Conference on Trends in Welding Research, Tokyo, Japan, pp. 91-93. | |
Bellmann, J., Lueg-Althoff, J., Schulze, S., Gies, S., Beyer, E., Tekkaya, A. E., 2016. Magnetic Pulse Welding: Solutions for Process Monitoring within Pulsed Magnetic Fields. In: EAPCC 2016, 6th Euro-Asian Pulsed Power Conference, BEAMS 2016, 21th International Conference on High-Power Particle Beams, MG-XV 2016, 15th International Conference on Megagauss Magnetic Field Generation and Related Topics, Lisbon, Portugal. | |
Ben Khalifa, N., Dahnke, C., Pietzka, D., Foydl, A., Tekkaya, A. E., 2016. Newest Developments in Composite Extrusion. In: 11th International Aluminum Extrusion Technology Seminar and Exposition, Chicago, USA, pp. 559-569. | |
Clausmeyer, T., Heibel, S., Nester, W., Tekkaya, A. E., 2016. Damage characterization of high-strength multiphase steels. In: IDDRG 2016, Linz, Austria, pp. 10-17. | |
Dahnke, C., Lorch, Y., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2016. Manufacturing of Shape Memory Metal Matrix Composites (SM-MMCs) by Composite Extrusion. In: 11th International Aluminum Extrusion Technology Seminar and Exposition, Chicago, USA, pp. 571-581. | |
Dang, T., Tebaay, L. M., Gies, S., Tekkaya, A. E., 2016. Multiple forming tools in incremental forming – Influence of the forming strategies on sheet contour. In: ESAFORM 2016, AIP Conference Proceedings. 1769, 070009, Nantes, France, DOI: http://dx.doi.org/10.1063/1.4963462. | |
Gebhard, J., El Budamusi, M., Becker, C., Chen, L., Clausmeyer, T., Tekkaya, A. E., 2016. Enhancement of forming limits in bending with a combined strategy. In: 66th Japanese Joint Conference for the Technology of Plasticity, pp. 195-196. | |
Gutknecht, F., Übelacker, D., Clausmeyer, T., Tekkaya, A. E., 2016. Numerical investigation of blanking metal polymer sandwich sheets. In: NUMIFORM 2016, MATEC Web of Conferences, Troyes, France, DOI: http://dx.doi.org/10.1051/matecconf/20168016002. | |
Hahn, M., Ben Khalifa, N., Wollmann, T., Jaschinski, J., Modler, N., Zeiser, A., Wiedemann, S., Meissen, F., 2016. Forming of Carbon Fibre-reinforced Metal Laminates in combination with injection moulding. The 5th International Lower Silesia - Saxony Conference - AutoMetForm 2016, Wroclaw, Poland, pp. 105-110. | |
Hess, S., Schild, J., Hiegemann, L., Hoppmann, C., Tekkaya, A. E., 2016. Process limits of an integrated deep drawing and injection molding process. IDDRG 2016, Linz, Austria, pp. 287-294. | |
Hiegemann, L., Agarwal, C., Weddeling, C., Tekkaya, A. E., 2016. Reducing the stair step effect of layer manufactured surfaces by ball burnishing. In: ESAFORM 2016, AIP Conference Proceedings, Nantes, France, DOI: http://dx.doi.org/10.1063/1.4963612.Kruse, D., Frerich,S., Petermann, M., Ortelt, T. R., Tekkaya, A. E., 2016. Remote labs in ELLI: Lab experience for every student with two different approaches. In: EDUCON 2016, Abu Dhabi, UAE, pp. 469-475. | |
Liewald, M., Neipp, C., Weber, C., Surm, H., Otto, M., Leonhardt, C., Többe, J., Meßner, R., Benkert, T., Felde, A., Schwane, M., Metzger, M., Tiffe, M., Vogel, F., Missal, N., Napierala, O., Diefenbach, J., Kuwert, P., Huskic, A., Tothgang, M., Dehio, J., Dürig, M., Busse, A., 2016. Lightweight Forging – Innovation Network for Technological Progress in Part, Process and Material Design for Forged Parts in Automotive Technology. In: ICFG 2016, 49th Plenary Meeting, Stuttgart, Germany, pp. 136-140. | |
Lueg-Althoff, J., Bellmann, J., Gies, S., Schulze, S., Tekkaya, A. E., Beyer, E., 2016. Magnetic Pulse Welding of Dissimilar Metals in Tube-to-Tube Configuration. In: 10th International Conference on Trends in Welding Research, Tokyo, Japan, pp. 87-90. | |
Lueg-Althoff, J., Gies, S., Schulze, S., Bellmann, J., Beyer, E., Schulze, S., Tekkaya, A. E., 2016. Magnetic Pulse Welding of Tubes: Ensuring the Stability of the Inner Diameter. In: EAPCC 2016, 6th Euro-Asian Pulsed Power Conference, BEAMS 2016, 21th International Conference on High-Power Particle Beams, MG-XV 2016, 15th International Conference on Megagauss Magnetic Field Generation and Related Topics, Lisbon, Portugal. | |
Lueg-Althoff, J., Schilling, B., Bellmann, J., Gies, S., Schulze, S., Beyer, E., Tekkaya, A. E., 2016. Influence of the Wall Thicknesses on the Joint Quality during Magnetic Pulse Welding in Tube-to-Tube Configuration. In: ICHSF 2016, Dortmund, Germany, pp. 259-268. | |
May, D., Lensing, K., Tekkaya, A.E., 2016. Internationalization as a topic in higher engineering education - A quantitative content analysis examining the engineering curricula from ten German technical universities. In: EDUCON 2016, Abu Dhabi, UAE, pp. 136-141. | |
May, D., Tekkaya, A. E., 2016. Using transnational online learning experiences for building international student working groups and developing intercultural competences. In: ASEE‘s 123rd Annual Conference & Exposition, New Orleans, USA. | |
May, D., Terkowsky, C., Ortelt, T. R., Tekkaya, A. E., 2016. The Evaluation of Remote Laboratories: Development and application of a holistic model for the evaluation of online remote laboratories in manufacturing technology education. In: REV2016 – 13th International Conference on Remote Engineering and Virtual Instrumentation, Madrid, Spain, pp. 127-136. | |
May, D., Terkowsky, C., Ortelt, T. R., Tekkaya, A. E., 2016. Using and Evaluating Remote Labs in Transnational Online Courses for Mechanical Engineering Students Paper. In: ASEE‘s 123rd Annual Conference & Exposition, New Orleans, USA. | |
Mennecart, T., Hiegemann, L., Ben Khalifa, N., 2016. Werkzeugentwicklung für In-Situ-Hybridisierung von Metall-Faser- Metall-Laminaten unter Berücksichtigung der viskosen Zwischenlage. In: 23. Sächsische Fachtagung Umformtechnik. | |
Meya, R., Ortelt, T. R., Selvaggio, A., Chatti, S., Becker, C., Tekkaya, A. E., 2016. Development of a tele-operative control for the incremental tube forming process and its integration into a learning environment. EDUCON 2016, 13.05.2016, Abu Dhabi, UAE, pp. 80-86. | |
Müller, M., Gies, S., Tekkaya, A. E., 2016. Gesenkfreies Innenhochdruckfügen von Vierkantrohren. In: 7. VDI Fachtagung Welle-Nabe-Verbindungen, Karlsruhe, Germany, pp. 241-246. | |
Napierala, O., Kolpak, F., Dahnke, C., Tekkaya, A. E., Wälder, J., Liewald, M., 2016. Potentials and Limits of Hollow Lateral Extrusion. In: ICFG 2016, 49th Plenary Meeting, Stuttgart, Germany, pp. 168-173. | |
Ortelt, T. R., Gies, S., Traphöner, H., Chatti, S., Tekkaya, A. E., 2016. Integration of new concepts and features into forming technology lectures. In: EDUCON 2016, Abu Dhabi, UAE, pp. 555-562. | |
Ortelt, T. R., Pekasch, S., Lensing, K., Guéno, J., May, D., Tekkaya, A. E., 2016. Concepts of the international manufacturing remote lab (MINTReLab): Combination of a MOOC and a remote lab for a manufacturing technology online course. In: EDUCON 2016, Abu Dhabi, UAE, pp. 602-607. | |
Ortelt, T. R., Selvaggio, A., Meya, R., Chatti, S., Tekkaya, A. E., 2016. Live Demo of Two Experiments using a Remote Lab for forming Technology. In: REV2016 – 13th International Conference on Remote Engineering and Virtual Instrumentation, Madrid, Spain, pp. 326-327. | |
Selvaggio, A., Sadiki, A., Ortelt, T. R., Meya, R., Becker, C., Chatti, S., Tekkaya, A. E., 2016. Development of a Cupping Test in Remote Laboratories for Engineering Education. In: REV2016 – 13th International Conference on Remote Engineering and Virtual Instrumentation, Madrid, Spain, pp. 116-120. | |
Sieczkarek, P., Silva, C. M. A., Wernicke, S., Tekkaya, A. E., Martins, P. A. F., 2016. Mechanical characterization of materials for sheet-bulk metal forming processes. In: RTME 2016 Conference, Aveiro, Portugal, pp. 62-83. | |
Staupendahl, D., Chatti, S., Tekkaya, A. E., 2016. Closed-Loop Control Concept for Kinematic 3D-Profile Bending. In: ESAFORM 2016, AIP Conference Proceedings, Nantes, France, DOI: http://dx.doi.org/10.1063/1.4963542. | |
Schwane, M., Haase, M., Tekkaya, A. E., Misiolek, W., 2016. Influence of Extrusion Die Geometry on Weld Seam Properties of AA6082 Extrudates. In: 11th International Aluminum Extrusion Technology Seminar and Exposition, Chicago, USA, pp. 781-788. | |
Uhlmann, E., Tekkaya, A. E., Kashevko, V., Gies, S., Reimann, R., John, P., 2016. Qualification of CuCr1Zr for the SLM Process. In: ICHSF 2016, Dortmund, Germany, pp. 173-182. | |
2015 | |
Becker, C., Tekkaya, A. E.,2015. Wall thickness distribution during a combined tube spinning and bending process. In: Key Engineering Materials 651 - 653, 18th International ESAFORM Conference on Material Forming 2015, Graz, Austria, pp. 1614-1619. | |
Chatti, S., Weinrich, A., El Budamusi, M., Becker, C., Maevus, F., Tekkaya, A. E., 2015. Influencing the Forming Limits in Air Bending Using Incremental Stress Superposition. In: Key Engineering Materials 651-653, 18th International ESAFORM Conference on Material Forming 2015, Graz, Austria, pp. 1602-1607. | |
Chen, H., Hess, S., Güner, A., Tekkaya, A. E., 2015. Active and passive granular media-based tube press hardening. In: 10. Erlanger Workshop Warmblechumformung, Meisenbach, Germany, pp. 115-129. | |
Citrea, T., Dahnke, C., Gagliardi, F., Haase, M., Ambrogio, G., Tekkaya, A. E., 2015. Optimization of Porthole Die for Non-symmetric Composite Profiles. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4778-4785. | |
Dahnke, C., Foydl, A., Levin, E., Haase, M., Tekkaya, A. E., 2015. Process window for the embedding of eccentric steel-reinforcing elements in the discontinuous composite extrusion process. In: Advanced Materials Research, WGP Kongress 2015, Hamburg, Germany. | |
Dahnke, C., Hilbring, J., Kloppenborg, T., Haase, M., Tekkaya, A. E., 2015. Investigations for the Embedding of Functional Elements in the Composite Extrusion Process. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4763-4770. | |
Dahnke, C., Selvaggio, A., Haase, M., Tekkaya, A. E., 2015. Developments in Composite Extrusion. JSTP International Seminar on Precision Forging (7th ISPF), Nagoya, Japan, pp. 119-122. | |
El Budamusi, M., Isik, K., Chen, L., Clausmeyer, T., Becker, C., Tekkaya, A. E., 2015. Enhanced Damage Modelling for Sheet Metal Forming of High Strength Steels – Part 2: Application to forming processes. 2nd European Steel Technology and Application Days, Düsseldorf, Germany, (CD). | |
Gamberoni, A., Donati, L., Reggiani, B., Haase, M., Tomesani, L., Tekkaya, A. E., 2015. Process Monitoring and Analysis of Hollow EN AW-6063 Extruded Profile. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4714-4722. | |
Gutknecht, F., Steinbach, F., Clausmeyer, T., Tekkaya, A. E., 2015. Advanced material model for shear cutting of metal sheets. In: Proceedings of COMPLAS XIII, Barcelona, Spain, pp. 170-181. | |
Grzancic, G., Becker, C., Ben Khalifa, N., Tekkaya, A. E., 2015. Basic Investigations In Incremental profile Forming. MSEC2015, Charlotte, North Carolina, US. doi:10.1115/MSEC2015-9406. | |
Hölker, R., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2015. Hot extrusion dies with conformal cooling channels produced by additive manufacturing. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4838-4846. | |
Isik, K., Chen, L., El Budamusi, M., Clausmeyer, T., Becker, C., Tekkaya, A. E., 2015. Enhanced Damage Modelling for Sheet Metal Forming of High Strength Steels - Part 1: Material model, experimental characterization and identification. 2nd European Steel Technology and Application Days, Düsseldorf, Germany, (CD). | |
Isik, K., Doig, M., Richter, H., Clausmeyer, T., Tekkaya, A. E., 2015. Enhancement of Lemaitre Model to Predict Cracks at Low and Negative Triaxialities in Sheet Metal Forming. Key Engineering Materials Special Issue SheMet 2015 639, pp. 427-434. | |
Levin, E., Haase, M., Foydl, A., Tekkaya, A. E., 2015. Composite extrusion of aluminum with discontinuous eccentric reinforcements. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4758-4762. | |
Lueg-Althoff, J., Gies, S., Weddeling, C., Tekkaya, A. E., 2015. Joining of aluminium tubes by magnetic pulse welding, In: Aluminium - Building the Future, Congress Proceedings, European Aluminium Congress, Session 4, 23.-24.11.2015, Düsseldorf, Germany, pp. 1-15. | |
May, D., Ortelt, T. R. , Tekkaya, A. E., 2015. Using Remote Laboratories for Transnational Online Learning Environments in Engineering Education. In: Proceedings of E-Learn: World Conference on E-Learning in Corporate, Government, Healthcare, and Higher Education 2015, Hawaii, USA, pp. 632-637. | |
May, D., Sadiki, A., Pleul, C., Tekkaya A. E., 2015. Teaching and learning globally connected; Using live online classes for preparing international engineering students for transnational collaboration and for studying in Germany. 12th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bangkok, Thailand, pp. 114-122. | |
Mennecart, T., Güner, A., Tekkaya, A. E., 2015. Forming behaviour of laser welded Tailor Welded Blanks made out of multiphase high strength steels - Characterisation, Modelling, and Verification. 2nd European Steel Technology and Application Days, Düsseldorf, Germany, (CD). | |
Napierala, O., Haase, M., Tekkaya, A. E., 2015. Hollow Lateral Extrusion without Lateral Mandrel. JSTP International Seminar on Precision Forging (7th ISPF), Nagoya, Japan, pp. 151-154. | |
Ossenkemper, S., Haase, M., Tekkaya, A. E., 2015. Composite Cold Forging of Shafts. In: Proceedings of the 48th ICFG Plenary Meeting (ICFG2015) Daejeon, Republic of Korea, pp. 89-94. | |
Ossenkemper, S., Haase, M., Tekkaya, A. E., Nadolski, D., Schulz, A., Hoffmann, F., Zoch, H., 2015. Cold Forging and Heat Treatment Induced Distorsion. In: Proceedings of the 48th ICFG Plenary Meeting (ICFG2015) Daejeon, Republic of Korea, pp. 14-19. | |
Sadiki, A., Ortelt, T. R., Pleul, C., Becker, C., Chatti, S., Tekkaya, A. E., 2015. The Challenge of Specimen Handling in Remote Laboratories for Engineering Education. 12th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bangkok, Thailand, pp. 187-192. | |
Schwane, M., Kloppenborg, T., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2015. Approaches for the Simulation of Composite Extrusion - Possibilities and Limits. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4771-4777. | |
Selvaggio, A., Donati, L., Reggiani, B., Haase, M., Dahnke, C., Schwane, M., Tomesani, L., Tekkaya, A. E., 2015. Effect of Choking and Bearing Length on Metal Flow Balancing in Extrusion Dies. In: Materials Today: Proceedings 2, Aluminium 2000 and International Conference on Extrusion and Benchmark (ICEB), Florence, Italy, pp. 4704-4713. | |
Staupendahl, D., Becker, C., Tekkaya, A. E., 2015. The Impact of Torsion on the Bending Curve during 3D Bending of Thin- Walled Tubes – a Case Study on Forming Helices. Key Engineering Materials 651-653, pp. 1595-1601. | |
Tekkaya, A. E., Becker, C., Ortelt, T. R., Grzancic, G., 2015. Utilizing Stress Superposition in Metal Forming. JSTP International Seminar on Precision Forging (7th ISPF), Nagoya, Japan, pp. 1-6. | |
Tekkaya, A. E., Hahn, M., Hiegemann, L., Weddeling, C., Ben Khalifa, N., 2015. Umformen faserverstärkter thermoplastischer Kunststoff-Halbzeuge mit metallischen Deckblechen für den Leichtbau. 35. EFB-Kolloquium Blechverarbeitung 2015, Intermezzo der hybriden Werkstofflösungen - Hat Blech eine Zukunft?, Bad Boll, Germany, pp. 185-200. | |
Tekkaya, A. E., Kloppenborg, T., Hölker, R., Schwane, M., Güzel, A., Haase, M., 2015. New Developments in the Simulation of Extrusion Processes. In: Proceedings of the International Conference: New Developments in Forging Technology – NEMU 2015, Stuttgart, Germany, pp. 125-134. | |
Zeller, S., Beese, S., Gerstein, G., Isik, K., Löhnert, S., Nürnberger, F., Wriggers, P., Maier, H. J., Tekkaya A. E., 2015. Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen. In: 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Dortmund, Germany, pp. 113-128. | |
2014 | |
Cai, S., Weddeling, C., Tekkaya, A. E., 2014. Investigation of Tailored Pressure Distributions by Vaporizing Tailored Foils. In: Proceedings of the 6th International Conference on High Speed Forming - ICHSF 2014, 26-29 May, Daejeon, Korea. | |
Chen, H., Güner, A., Ben Khalifa, N., Tekkaya, A. E., 2014. Numerical and experimental investigation on granular media-based tube press hardening. In 9. Erlanger Workshop Warmblechumformung 2014, 18.11.2014, Erlangen, Germany. | |
Dahnke, C., Pietzka, D., Haase, M., Tekkaya, A. E., 2014. Extending the Flexibility in the Composite Extrusion Process. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany | |
Demir, O.K., Weddeling, C., Ben Khalifa, N., Tekkaya, A. E., 2014. Avoiding Bending in Case of Uniaxial Tension with Electromagnetic Forming. In: Proceedings of the 6th International Conference on High Speed Forming - ICHSF 2014, 26-29 May, Daejeon, Korea. | |
Doig, M., Isik, K., Soyarslan, C., Eßer, G., Tekkaya, A. E., 2014. Formability assessment of advanced high strength steel sheets using (an)isotropic Lemaitre’s damage model. In: 4th International Conference on Steels in Cars and Trucks, Braunschweig, Germany. | |
El Budamusi, M., Weinrich, A., Becker, C., Chatti, S., Tekkaya, A. E., 2014. Forming Limit Extension of High-Strength Steels in Bending Processes. In: Key Engineering Materials 611-612, Esaform 2014, Espoo, Finland. | |
Gagliardi, F., Schwane, M., Citrea, T., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2014. Bridge Design Influences on the Pressure Conditions in the Welding Chamber for Porthole Die Extrusion. In: Key Engineering Materials Vol. 622-623, Metal Forming 2014, 15 th International Conference, Palermo, Italy. | |
Georgiadis, G., Tekkaya A. E., Weigert, P., Weiher, J., Kurz, H., 2014. Investigations on the manufacturability of thin press hardened steel components. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany. | |
Gies, S., Weddeling, C., Tekkaya, A. E., 2014. Experimental Investigations on the Optimum Driver Configuration for Electromagnetic Sheet Metal Forming. In: 6th International Conference on High Speed Forming, Daejeon, Korea. | |
Grzancic, G., Becker, C., Hermes, M., Tekkaya, A. E., 2014. Innovative Machine Design for Incremental Profile Forming. Metal Forming 2014, In: Key Engineering Materials Vol. 622-623, Metal Forming 2014, 15 th International Conference, Palermo, Italy. | |
Güner, A., Zillmann, B., Lampke, T., Tekkaya, A. E., 2014. Titel In-Situ Stress Analysis with X-Ray Diffraction for Yield Locus Characterization of Sheet Metals. In: AIP Conference Proceedings 1567, Numisheet 2014, Melbourne, Australia. | |
Haase, M., Tekkaya, A. E., 2014. Recycling of aluminum chips by hot extrusion with subsequent cold extrusion. In: 11th International Conference on Technology of Plasticity, ICTP, Nagoya, Japan. | |
Hiegemann, L:, Weddeling, C.; Ben Khalifa, N., Tekkaya, A. E., 2014. Analytical prediction of roughness after ball burnishing of thermally coated surfaces. In: 11th International Conference on Technology of Plasticity, ICTP, Nagoya, Japan. | |
Hölker, R., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2014. Increased Productivity in Hot Aluminum Extrusion by Using Extrusion Dies with Inner Cooling Channels Manufactured by Rapid Tooling. In: Key Engineering Materials 611-612, Esaform 2014, Espoo, Finland. | |
Isik, K., Doig, M., Tekkaya, A. E., 2014. Failure Prediction During Deep Drawing of AHSS Using (An)isotropic Damage Model. In: International Deep Drawing Research Group, IDDRG2014, Paris, France. | |
Jäger, A., Ossenkemper, S., Hänisch, S., Tekkaya, A. E., 2014. Tiefzieh-Verbundfließpressen als innovatives Verfahren zur Herstellung von Hybridbauteilen. In: 21. Umformtechnisches Kolloquium, Hannover, Germany. | |
Kloppenborg, T., Schwane, M., Ben Khalifa, N., Tekkaya, A. E.,2014. Modeling and analysis of the material flow in aluminum extrusion. In OMD-2014, International Science & Technology Congress, 14-17.04.2014, Moscow, Russia. | |
Koch, L., Kennemann, F., Jerg,C., Horn, U., Steinbach, F., Tekkaya, A. E., Hermann, M., 2014. Steel Absorbers in Mass Production – Challenges, Opportunities and produced samples. In: EuroSun 2014, Aix-les-Bains, France. | |
Lauwers, B., Klocke, F., Klink, A., Tekkaya, A. E., Neugebaur, R., Mcintosh, D., 2014. Hybrid Processes in manufacturing. In: International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP) 22.-24.6. 2014, Darmstadt, Germany. | |
Lorenz, A., Lueg-Althoff, J., Göbel, G., Weddeling, C., Beyer, E., Tekkaya, A.E., 2014. Influence of Axial Workpiece Positioning during Magnetic Pulse Welding of Aluminum-Steel Joints. In: International Conference on High Speed Forming - ICHSF 2014, Daejeon, Korea. | |
Löbbe, C., Becker, C., Tekkaya, A. E., 2014. Warm Bending of Microalloyed High-Strength Steel by Local Induction Heating. In: Forming Technology Forum 2014, Enschede, Netherlands. | |
Lueg-Althoff, J., Lorenz, A., Gies, S., Weddeling, C., Goebel, G., Tekkaya, A. E. , Beyer, E., 2014. Magnetic Pulse Welding by Electromagnetic Compression: Determination of the Impact Velocity. In: International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation (ICTMP) 22.-24.6. 2014, Darmstadt, Germany. | |
Mennecart, T., Güner, A., Ben Khalifa, N., Tekkaya, A. E., 2014. Effects of weld line in deep drawing of tailor welded blanks of high strength steels. In: Key Engineering Materials 611-612, Esaform 2014, Espoo, Finland. | |
Mennecart, T., Güner, A., Ben Khalifa, N., Tekkaya, A. E., 2014. Effects of weld line in deep drawing of tailor welded blanks of high strength steels. In: Key Engineering Materials 611-612, Esaform 2014, Espoo, Finland. | |
Mennecart, T., Güner, A., Ben Khalifa, N., Tekkaya, A. E., 2014. Steuerung der Rückfederung durch Nutzung von Funktionselementen innerhalb eines Tiefziehwerkzeuges aus Kunststoff. In: Nebu 2014, Stuttgart, Germany. | |
Mennecart, T., Güner, A., Ben Khalifa, N., Tekkaya, A. E., 2014. Control of geometry deviation by stiffness variation in polymer deep drawing tools. In: Nebu 2014, Stuttgart, Germany. | |
Pietzka, D., Jäger, A., Ben Khalifa, N., Foydl, A., Tekkaya, A. E., 2014. Extrusion of Multi-Material Components. In: Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference MSEC2014 June 9-13, 2014, Detroit, Michigan, USA. | |
Schwane, M., Dahnke, C., Haase, M., Ben Khalifa, N, Tekkaya, A. E., 2014. Composite Hot Extrusion of Functional Elements. In: WGP Kongress 2014, 9.-10.9.2014 in Erlangen, Germany. | |
Schwane, M., Citrea, T., Dahnke, C., Haase, M., Ben Khalifaa, N., Tekkaya, A. E., 2014. Simulation of composite hot extrusion with high reinforcing Volumes. In: 11th International Conference on Technology of Plasticity, ICTP, Nagoya, Japan. | |
Schwane, M., Kloppenborg, T., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2014. Residual stresses in continuously reinforced composite profiles with symmetric cross sections, In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany. | |
Selvaggio, A., Haase, M., Ben Khalifa, N., Tekkaya, A. E., 2014. Extrusion of profiles with variable wall thickness. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany. | |
Sieczkarek, P., Isik, K., Ben Khalifa, N., Martins, P. A. F., Tekkaya, A. E., 2014. Mechanics of sheet-bulk indentation. In: WGP Kongress 2014, 9.-10.9.2014 in Erlangen, Germany. | |
Sieczkarek, P., Weddeling, C., Ben Khalifa, N., Tekkaya, A. E., 2014. Herstellung von belastungsangepassten Funktionsbauteilen mittels inkrementeller Blechmassivumformung. In: 21. Umformtechnisches Kolloquium, Hannover, Germany. | |
Steinbach, F., Chen, L., Güner, A., Tekkaya, A. E., 2014. Experimental and numerical analysis of dry shearing of aluminum 6082. In: WGP Kongress 2014, 9.-10.9.2014 in Erlangen, Germany. | |
Steinbach, F., Güner, A., Tekkaya, A. E., 2014. Dry shearing of micro-alloyed steels. In: Key Engineering Materials Vol. 622-623, Metal Forming 2014, 15 th International Conference, Palermo, Italy. | |
Staupendahl, D., Löbbe, C., Becker, C., Tekkaya, A.E., 2014. Process Combinations for the Production of Load-Optimized Structural Components. In: Wieland, H.J., Brockmann, S., TEMA Technologie Marketing AG (Eds.), SCT 2014. 4th Intern. Conf. on Steels in Cars and Trucks, Future Trends in steel development, processing technologies and applications, Düsseldorf, Germany. | |
Tekkaya, A. E., Ben Khalifa, N., Grzancic, G., Hölker, R., 2014. Forming of lightweight metal components: Need for new Technologies. In: 11th International Conference on Technology of Plasticity, ICTP, Nagoya, Japan. | |
ul Hassan, H., Güner, A., Ben Khalifa, N.; Tekkaya, A. E., 2014. Incremental Analysis of Springback and Kinematic Hardening by the Variation of Tension During Deep Drawing. In: AIP Conference Proceedings 1567, Numisheet 2014, Melbourne, Australia. | |
Vivek, A., Weddeling, C., Hahn, M., Daehn, G. S., Tekkaya, A. E., 2014. Eletrically driven plasma via vaporization of metallic conductors: A novel tool for joining tubular workpieces. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany. | |
Weddling, C., Gies, S., Tekkaya, A. E., Ben Khalifa, N., 2014. Analytical Methodology for the Process and Joint Design of Form-Fit by Die-Less Hydroforming. In: Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference MSEC2014 June 9-13, 2014, Detroit, Michigan, USA. | |
Weddeling, C., Hahn, M., Daehn, G. S., Tekkaya, A. E. 2014. Uniform Pressure Electromagnetic Actuator - An innovative tool for magnetic pulse welding. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany. | |
Weinrich, A., Becker, C., Maevus, F., Chatti, S., Tekkaya, A. E., 2014. Analysis of the Potential of Incremental Stress Superposition on Air Bending. In: Key Engineering Materials Vol. 622-623, Metal Forming 2014, 15 th International Conference, Palermo, Italy. | |
Weinrich, A., Becker, C., Maevus, F., Chatti, S., Tekkaya, A. E., 2014. Bending of Tailored Blanks Using Elastic Tools. In: WGP Kongress 2014, 9.-10.9.2014, Erlangen, Germany. | |
2013 | |
Alharthi, N. H., De Pari, L. Jr., Güzel, A., Jäger, A., Misiolek, W. Z., Tekkaya, A. Erman, 2013. Modeling Surface Grain Structure Evolution in Aluminum Alloy 6082 Hot Direct Extrusion. In: Proceedings of the 12th International Aluminium Conference, INALCO, Montreal, Canada. | |
Becker, C., Isik, K., Bayraktar, A., Chatti, S., Hermes, M., Soyarslan, C., Tekkaya, A. E., 2013. Numerical Investigation of the Incremental Tube Forming Process. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Behrens, B. A., Tekkaya, A. E., Kosch, K. G., Foydl, A., Kammler, M., Jäger, A., 2013. Manufacturing of steel-reinforced aluminum parts by co-extrusion and subsequent forging. In: Advances in Hot Metal Extrusion and Simulation of Light Alloys, Proceedings of ICEB 2013, Dortmund, Germany. | |
Ben Khalifa, N., Becker, C., Jäger, A., Kwiatkowski, L., Selvaggio, A., Tekkaya, A. E., 2013. Geometric gradation of profiles for lightweight applications. In: Proceedings of the 6th JSTP International Seminar on Precision Forging Kyoto, Japan. | |
Chen, H., Mennecart, T., Güner, A., Tekkaya, A. E., 2013. Numerical Modeling of Press Hardening of Tubes and Profiles Using Shapeless Solid as Forming Media. In: 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2013, Lulea, Sweden. | |
Doig, M., Isik, K., Soyarslan, C., Tekkaya, A. E., 2013. Versagensvorhersage bei der Blechumformsimulation höchstfester Stähle. In: 20. Sächsische Fachtagung Umformtechnik SFU2013, Dresden, Germany. | |
Faßmann, D., Isik, K., Zeller, S., Beese, S., Ben Khalifa, N., Nürnberger, F., Schaper, M., Tekkaya, A. E., Löhnert, S., Wriggers, P., 2013. Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden. In: 2. Workshop Blechmassivumformung, Erlangen, Germany. | |
Foydl, A., Kosch, K.-G., Jäger, A., Pfeiffer, I., Tekkaya, A. E., Behrens, B.-A., 2013. Co-extrusion of discontinuosly steel-reinforced aluminium. In: Proceedings of the 6th JSTP International Seminar on Precision Forging, Kyoto, Japan. | |
Georgiadis, G., Weigert, P., Kurz, H., Alsmann, M., Engelhardt, P., Tekkaya, A. E., Scholtes, B., 2013. Untersuchung der Herstellbarkeit dünner Warmumformbauteile, In: 8. Erlanger Workshop Warmblechumformung, Erlangen, Germany. | |
Gies, S, Weddeling, C., Kwiatkowski, L., Tekkaya, A. E., 2013. Groove filling characteristics and strength of form-fit joints produced by die-less hydroforming. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Haase, M., Jäger, A., Tekkaya, A. E., 2013. Recycling of aluminum chips by hot extrusion. In: Proceedings of the 4th Machining Innovations Conference, Hannover, Germany. | |
Hänisch, S., Ossenkemper, S., Jäger, A., Tekkaya, A. E., 2013. Forging Technology 2013. In: International Conference on „New Developments in Forging Technology”, Fellbach, Germany. | |
Hölker, R., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., 2013. Cooling of extrusion dies manufactured by rapid tooling technologies. In: Proceedings of the 6th JSTP International Seminar on Precision Forging, Kyoto, Japan. | |
Jäger, A., Selvaggio, A., Hänisch, S., Haase, M., Becker, C., Kolbe, J., Ben Khalifa, N., Tekkaya, A. E., 2013. Innovative Hybrid Process in Metal Forming. In: Proceedings of NAMRI/SME 41, Madison, USA. | |
Kiliclar, Y., Demir, O. K., Vladimirov, I. N., Kwiatkowski, L., Reese, S., Tekkaya, A. E.,2013. Simulation of electromagnetic forming of a cross-shaped cup by means of a viscoplasticity model coupled with damage at finite strains.In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Kloppenborg, T., Schwane, M., Ben Khalifa, N., Jäger, A., Tekkaya, A. E., 2013. Simulation Based Development and Analysis of Extrusion Processes. In: Proceedings of the European Aluminium Congress 2013, Düsseldorf, Germany. | |
May, D., Terkowsky, C., Haertel, T., Pleul, C., 2013. The laboratory in your hand – Making remote laboratories accesible through mobile devices. In: Proceedings of IEEE Global Engineering Education Conference 2013, Berlin, Germany. | |
Mennecart, T., ul Hassan, H., Fruth, J., Wagner, T., Güner, A., Ben Khalifa, N., Tekkaya, A. E.,2013. Reduction of springback by use of deep drawing tools with locally and temporally varying stiffness. In: Tools and Technologies for Processing Ultra High Strength Materials, TTP2013, Graz, Austria. | |
Ossenkemper, S., Haase, M., Soyarslan, C., Jäger, A., Tekkaya, A. E., 2013. Tool design induced anisotropic flow behavior of hot extruded aluminum profiles. In: Advances in Hot Metal Extrusion and Simulation of Light Alloys, Proceedings of ICEB 2013, Dortmund, Germany. | |
Pietzka, D., Ben Khalifa, N., Gerke, S., Tekkaya, A. E., 2013. Composite extrusion of thin aluminum profiles with high reinforcing volume. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Pleul, C., Hermes, M., Chatti, S., Tekkaya, A. E., 2013. miniLABs – Drop in and become fascinated by engineering experiments. In: Proceedings of IEEE Global Engineering Education Conference 2013, Berlin, Germany. | |
Schuster, A., Raedt, H-W., Tekkaya, A. E., 2013. Influence of Cold Upsetting on the Shape of the Microstructure and Inclusions in Different Kind of Steels and on the Notch Impact Energy. In: Proceedings International Cold Forging Group, 46th ICFG Plenary Meeting, Paris, France. | |
Schwane, M., Kloppenborg, T., Ben Khalifa, N., Jäger, A., Tekkaya, A. E., 2013. Finite element based determination and optimization of seam weld positions in porthole die extrusion of double hollow profile with asymmetric cross section. In: Advances in Hot Metal Extrusion and Simulation of Light Alloys, Proceedings of ICEB 2013, Dortmund, Germany. | |
Schwane, M., Gagliardi, F., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., 2013. Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Selvaggio, A., Ben Khalifa, N., Tekkaya, A. E., 2013. Strangpressen von Profilen mit variabler Wandstärke. In: Forging Technology 2013, International Conference on „New Developments in Forging Technology”, Fellbach, Germany. | |
Selvaggio, A., Kloppenborg, T., Schwane, M., Hölker, R., Jäger, A., Donati, T. L., Tekkaya, A. E., 2013. Extrusion Benchmark 2013 – Experimental analysis of mandrel deflection, local temperature and pressure in extrusion dies. In: Advances in Hot Metal Extrusion and Simulation of Light Alloys, Proceedings of ICEB 2013, Dortmund, Germany. | |
Sieczkarek, P., Kwiatkowski, L., Tekkaya, A. E., Krebs, E., Kersting, P., Tillmann, W., Herper, J., 2013. Innovative tools to improve incremental bulk forming processes. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Sieczkarek, P., Kwiatkowski, L., Ben Khalifa, N., Tekkaya, A. E., 2013. Novel five-axis forming press for the incremental sheet-bulk metal forming. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
ul Hassan, H., Fruth, J., Güner, A.,Mennecart, T., Tekkaya, A. E., 2013. Finite element simulations for sheet metal forming process with functional input for the minimization of springback. In: Proceedings of the IDDRG 2013 Conference, Zurich, Switzerland. | |
Yin, Q., Kolbe, J., Haupt, M., Tekkaya, A. E., 2013. Achieving high strains in sheet metal characterization using the in-plane torsion test. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
Yue, Z. M., Soyarslan, C., Badreddine, H., Saanouni, K., Tekkaya, A. E., 2013. Inverse identification of CDM model parameters for DP1000 steel sheets using a hybrid experimental-numerical methodology spanning various stress triaxility ratios. In: Key Engineering Materials 554-557, Esaform 2013, Aveiro, Portugal. | |
2012 | |
Becker, C., Staupendahl, D., Hermes, M., Chatti, S., Tekkaya, A. E., 2012. Incremental tube forming and torque superposed spatial bending – A view on process parameters. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 415-418. | |
Brosius, A., Weddeling, C., Hahn, M., Tekkaya, A. E., 2012. Elektromagnetisches Schweißen von Aluminiumblechen. In: Neugebauer, R., Drossel, W-G. (Eds.), 4th International Conference on Accuracy in Forming Technology, ICAFT 2012, Verlag Wissenschaftliche Scripten, Auerbach, Germany, pp. 227-237. | |
Chatti, S., Pietzka, D., Ben Khalifa, N., Jäger, A., Selvaggio, A., Tekkaya, A. E., 2012. Lightweight construction by means of profiles. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 369-374. | |
Demir, O. K., Kwiatkowski, L., Brosius, A., Tekkaya, A. E., 2012. Exceeding the forming limit curve with deep drawing followed by electromagnetic calibration. In: Tekkaya, A. E., Daehn, G. S., Kleiner, M. (Eds.), High Speed Forming 2012, Proceedings of the International Conference, Dortmund, Germany, pp.277-282. | |
Donati, L., Ben Khalifa, N., Tomesani, L., Tekkaya, A. E., 2012. A review of FEM code accuracy for reliable extrusion process analysis: Extrusion benchmarks 2009 and 2011. In: Proceedings of the Tenth International Aluminium Extrusion Technology Seminar ET´12, Miami, Florida (USA), pp. 481-491. | |
Donati, L., Ben Khalifa, N., Tomesani, L., Tekkaya, A. E., 2012. Effect of porthole design and welding chamber dimensions on material flow and weld deformability of extruded aluminium profiles. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 523-528. | |
Foydl, A., Pfeiffer, I., Kammler, M., Pietzka, D., Jäger, A., Tekkaya, A. E., Behrens, B.-A., 2012. Manufacturing of steel-reinforced aluminum products by combining hot extrusion and closed-die forging. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 481-486. | |
Foydl, A., Turan, E., Jäger, A., Tekkaya, A. E., 2012. Influence of steel reinforcement geometry on position and embedding quality in discontinuously-reinforced, co-extruded aluminum profiles. In: Proceedings of the Tenth International Aluminium Extrusion Technology Seminar ET´12, Miami, Florida (USA), pp. 665-674. | |
Gies, S., Weddeling, C., Marré, M., Kwiatkowski, L., Tekkaya, A. E., 2012. Analytic prediction of the process parameters for form-fit joining by die-less hydroforming. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 393-398. | |
Güley, V., Haase, M., Jäger, A., Tekkaya A. E., 2012. Hot extrusion of aluminum chips. In: Weiland, H., Rollet, A. D., Cassada, W. A. (Eds.), Proceedings of the 13th International Conference on Aluminium Alloys ICAA-13, John Wiley and Sons, Hoboken, New Jersey (USA), pp. 1559-1573. | |
Güley, V., Jäger, A., Tekkaya, A. E., 2012. The effect of die design on the mechanical properties of profiles recycled from AA6060 chips by hot extrusion. In: Proceedings of the Tenth International Aluminium Extrusion Technology Seminar ET´12, Miami, Florida (USA),pp. 391-398. | |
Güzel, A., Holzweissig, M. J., Jäger, A., Tekkaya, A. E., Maier, H. J., 2012. Prediction of dynamic grain structure evolution during hot extrusion of EN AW–6082. In: Heim, H.-P., Biermann, D., Maier, H. J., (Eds.), 1st International Conference on Thermo-Mechanically Graded Materials, Verlag Wissenschaftliche Scripten, Auerbach, Germany, pp.137-142. | |
Güzel, A., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., 2012. Investigation of the dynamic grain structure evolution during hot extrusion of EN AW–6082. In: Proceedings of the Tenth International Aluminium Extrusion Technology Seminar ET´12, Miami, Florida (USA), pp. 603-609. | |
Haase, M., Jäger, A., Tekkaya, A. E., 2012. Influence of extrusion ratio on AA6060 aluminum alloy chips solid state recycled by integrated extrusion and equal channel angular pressing. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 479-482. | |
Hänisch, S., Ossenkemper, S., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., Nadolski, D., Schulz, A., Hoffmann, F., Zoch, H.-W., 2012. Distortion in cold forging and cold drawing. In: Ishikawa, T., Yoshida, Y., Hayakawa, K., Wang, Z. G. (Eds.), Proceedings of the 45th ICFG Plenary Meeting, Nagoya, Japan, pp. 32-38. | |
ul Hassan, H., Ivanov, M., Fruth, J., Kuhnt, S., Kolbe, J., Tekkaya, A. E., 2012. Planung und Analyse von FE-Simulationen von Blechumformprozessen mit funktionalem Input. In: Tillmann, W., Nebel, J. (Eds.), Sonderforschungsbereich 708, 5. öffentliches Kolloquium, Verlag Praxiswissen, Dortmund, Germany, pp.173-183. | |
Hermes, M., Staupendahl, D., Becker, C., Weinrich, A., Tekkaya, A. E., Kleiner, M., 2012. Bending of tubes, profiles and sheet metals for lightweight structures. In: Gronstojanski, Z. (Ed.), Advanced Metal Forming Processes in Automotive Industry – The 3rd International Lower Silesia-Saxony Conference AutoMetForm, Wroclaw, Poland, pp. 251-263. | |
Hölker, R., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., 2012. New concepts for cooling of extrusion dies manufactured by rapid tooling. In: Tomesani, L., Donati, L. (Eds.), Progress in Extrusion Technology and Simulation of Light Metal Alloys, Selected, peer reviewed papers from the ICEB 2011, Key Engineering Materials 491, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 223-232. | |
Hölker, R., Jäger, A., Tekkaya, A. E., 2012. Rapid laminated hot extrusion dies with integrated cooling channels. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 503-506. | |
Jäger, A., Tekkaya, A. E., 2012. Analysis of the radial workpiece displacement in electromagnetic forming applied subsequent to hot aluminum extrusion. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 527-530. | |
Jäger, A., Tekkaya, A. E., 2012. Online measurement of the radial workpiece displacement in electromagnetic forming subsequent hot aluminium extrusion. In: Tekkaya, A. E., Daehn, G. S., Kleiner, M. (Eds.), High Speed Forming 2012, Proceedings of the International Conference, Dortmund, Germany, pp. 13-22. | |
Kiliclar, Y., Demir, O. K., Vladimirov, I. N., Kwiatkowski, L., Brosius, A., Reese, S., Tekkaya, A. E., 2012. Combined simulation of quasi-static deep drawing and electromagnetic forming by means of a coupled damageviscoplasticity model at finite strains. In: Tekkaya, A. E., Daehn, G. S., Kleiner, M. (Eds.), High Speed Forming 2012, Proceedings of the International Conference, Dortmund, Germany, pp. 325-334. | |
Kloppenborg, T., Brosius, A., Tekkaya, A. E., 2012. Optimierung des Verbundstrangpressens. In: 15. Workshop Simulation in der Umformtechnik, Optimierung von Prozessen in der Blech- und Massivumformung, Stuttgart, Germany, pp. 8-18. | |
Kloppenborg, T., Schwane, M., Ben Khalifa, N., Tekkaya, A. E., Brosius, A., 2012. Experimental and numerical analysis of material flow in porthole die extrusion. In: Tomesani, L., Donati, L. (Eds.), Progress in Extrusion Technology and Simulation of Light Metal Alloys, Selected, peer reviewed papers from the ICEB 2011, Key Engineering Materials 491, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 97-104. | |
Kolbe, J., Tekkaya, A. E., 2012. Entwicklung und Untersuchung steifigkeitsangepasster hybrider Tiefziehwerkzeuge auf Polymerbasis. In: Tillmann, W., Nebel, J. (Eds.), Sonderforschungsbereich 708, 5. öffentliches Kolloquium, Verlag Praxiswissen, Dortmund, Germany, pp. 147-157. | |
Kwiatkowski, L., Demir, O. K., Gies, S., Tekkaya, A. E.,2012. Recent developments in non-conventional tube forming. In: Proceedings of the North American Manufacturing Research Institution of the Society of Manufacturing Engineers, NAMRC, Vol. 40, Notre Dame, Indiana (USA). | |
Mennecart, T., Brosius, A., Kolbe, J., Tekkaya, A. E., 2012. Prediction of the forming behaviour of tailor welded blanks using a modified mixture rule. In: Tewari, A., Narasimhan, K., Date, P. P. (Eds.), Lightweighting: Possibilities and Challenges, Part I, International Deep Drawing Research Group Conference, Mumbai, India, pp. 361-366. | |
Pfeiffer, I., Foydl, A., Kammler, M., Matthias, T., Kosch, K.-G., Jäger, A., Ben Khalifa, N., Tekkaya, A. E., Behrens, B.-A., 2012. Compound forging of hot-extruded steel-reinforced aluminum parts. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 159-162. | |
Pietzka, D., Lueg-Althoff, J., Tekkaya, A. E., 2012. Innovative Umformverfahren für den Fahrzeugleichtbau, 2. VDI-Leichtbaukongress: Leichtbaustrategien für den Automobilbau, Stuttgart, Germany. | |
Psyk, V., Gerstein, G., Barlage, B., Albuja, B., Gies, S., Tekkaya, A. E., Bach, F.-W., 2012. Process model and design for magnetic pulse welding by tube expansion. In: Tekkaya, A. E., Daehn, G. S., Kleiner, M. (Eds.), High Speed Forming 2012, Proceedings of the International Conference, Dortmund, Germany, pp. 197-206. | |
Schwane, M., Kloppenborg, T., Reeb, A., Ben Khalifa, N., Brosius, A., Weidenmann, K. A., Tekkaya, A. E., 2012. Numerical approach for the evaluation of seam welding criteria in extrusion processes. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 517-522. | |
Sebastiani, G., Wawrosch, A., Franzen, V., Brosius, A., Tekkaya, A. E., 2012. FlexDie: A flexible tooling-concept for incremental sheet forming. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 883-888. | |
Selvaggio, A., Ben Khalifa, N., Chatti, S., Tekkaya, A. E., 2012. Manufacture of profiles with variable cross-sections, curvatures and twistings by influencing the material flow in hot extrusion. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany, pp. 507-510. | |
Selvaggio, A., Chatti, S., Ben Khalifa, N., Tekkaya, A. E., 2012. New developments in extrusion of profiles with variable curvatures and cross-sections. In: Proceedings of the Tenth International Aluminium Extrusion Technology Seminar ET´12, Miami, Florida (USA), pp. 505-512. | |
Selvaggio, A., Segatori, A., Güzel, A., Donati, L., Tomesani, L., Tekkaya, A. E., 2012. Extrusion Benchmark 2011: Evaluation of different design strategies on process conditions, die deflection and seam weld quality in hollow profiles. In: Tomesani, L., Donati, L. (Eds.), Progress in Extrusion Technology and Simulation of Light Metal Alloys, Selected, peer reviewed papers from the ICEB 2011, Key Engineering Materials 491, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 1-10. | |
Sieczkarek, P., Kwiatkowski, L., Tekkaya, A. E., Krebs, E., Biermann, D., Tillmann, W., Herper, J., 2012. Improved tool surfaces for incremental bulk forming processes of sheet metals. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 975-980. |
|
Steinbach, F., Koch, L., Hermann, M., Witulski, J., Tekkaya, A. E., 2012. Processing of new solar absorbers in steel design based on partially cold roll bonded hybrid semi-finished parts. In: Merklein, M., Hagenah, H. (Eds.), Key Engineering Materials 504-506, Special Edition: Material Forming ESAFORM 2012, Trans Tech Publications, Zurich-Durnten, Switzerland, pp. 137-142. | |
Tekkaya, A. E., 2012. Recent developments in bulk metal forming. In: Ishikawa, T., Yoshida, Y., Hayakawa, K., Wang, Z. G. (Eds.), Proceedings of the 45th ICFG Plenary Meeting, Nagoya, Japan, pp. 48-57. | |
Tekkaya, A. E., Franzen, V., Hiegemann, L., 2012. Inkrementelle Walzbearbeitung thermisch gespritzter Werkzeugwirkflächen und deren Einsatzverhalten in der Blechumformung. In: Tillmann, W., Nebel, J. (Eds.), Sonderforschungsbereich 708, 5. öffentliches Kolloquium, Verlag Praxiswissen, Dortmund, Germany, pp. 33-41. | |
Tekkaya, A. E., Güley, V., Haase, M., Jäger, A., 2012. Hot extrusion of aluminium chips. In: Weiland, H., Rollet, A. D., Cassada, W. A. (Eds.), Proceedings of the 13th International Conference on Aluminium Alloys ICAA-13, John Wiley and Sons, Hoboken, New Jersey (USA), pp. 1559-1574. | |
Weddeling, C., Gies, S., Nellesen, J., Kwiatkowski, L., Tillmann, W., Tekkaya, A. E., 2012. Influencing factors on the strength of electromagnetically produced form-fit joints using knurled surfaces. In: Tekkaya, A. E., Daehn, G. S., Kleiner, M. (Eds.), High Speed Forming 2012, Proceedings of the International Conference, Dortmund, Germany, pp. 243-254. | |
Weinrich, A., Hermes, M., Chatti, S., Tekkaya, A. E., 2012. Experimental and numerical investigations on incremental stress superposition in air bending. In: Mori, K., Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. (Eds.), Steel Research International, Special Edition: 14th International Conference Metal Forming, Wiley, Weinheim, Germany pp. 423-426. | |
Yin, Q., Brosius, A., Tekkaya, A. E., 2012. Möglichkeiten des ebenen Torsionsversuchs für die Charakterisierung des Verfestigungsverhaltens von Blechwerkstoffen. In: Borsutzki, M., Moninger, G. (Eds.), Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagung für Werkstoffprüfung 2012, Verlag Stahleisen, Düsseldorf, Germany, pp 51-56. |
![]() |
Tätigkeitsbericht 2019 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2018 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2017 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2016 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2015 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2014 Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Tätigkeitsbericht 2013 ca. 4 MB als Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Der Tätigkeitsbericht 2012 ca. 4 MB als Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Der Tätigkeitsbericht 2011 ca. 4 MB als Adobe PDF Datei Der Tätigkeitsbericht gibt einen Einblick in die Lehr- und Forschungstätigkeit am Institut für Umformtechnik und Leichtbau. Der Tätigkeitsbericht ist eine Broschüre im DIN A5-Format, die in gedruckter Form am IUL erhältlich ist. |
Download English |
![]() |
Der Tätigkeitsbericht 2010 |
Download English |
![]() |
Der Tätigkeitsbericht 2009 |
|